topic unable to use gui in Network Security

unable to use gui

hyundai_mum — Mon, 11 Mar 2019 17:20:46 GMT

Hi,

could u tell me which all asdm image file will be compatible for pix 515e version 7.0

Regards

Hasmukh

Re: unable to use gui

hyundai_mum — Fri, 12 Mar 2010 11:39:02 GMT

Hi,

i took asdm-603.bin image file but it gives me error while i set it as asdm file by cmd asdm image flash:asdm-603.bin

error "device manager image set but not a valid image file flash:asdm-603.bin"

could anybody tell me about the problem..................

Regards

Hasmukh

Re: unable to use gui

clark.d — Fri, 12 Mar 2010 14:22:20 GMT

I beleieve the 6.x servies of ADM is for the 8.x IOS line. For 7 you need the 5.x series of the ASDM.

Dave

Re: unable to use gui

hyundai_mum — Mon, 15 Mar 2010 07:16:59 GMT

Hi Dave,

i took asdm-512.bin but still same error message comes

Hasmukh

Re: unable to use gui

clark.d — Mon, 15 Mar 2010 13:07:21 GMT

Do a 'dir' and post here. Also post pix config.

Re: unable to use gui

hyundai_mum — Wed, 17 Mar 2010 10:43:51 GMT

-dir- OUTPUT

-Directory of flash:/

6 -rw- 1767 06:11:31 Mar 12 2010 downgrade.cfg

9 -rw- 1966136 06:11:55 Mar 12 2010 image_old.bin

10 -rw- 5437440 06:20:02 Mar 12 2010 pix704.bin

13 -rw- 7495680 05:46:26 Mar 15 2010 asdm-512.bin

show run **OUTPUT**

FIREWALL# show run

PIX Version 7.0(4)

hostname FIREWALL

domain-name default.domain.invalid

enable password *******&%&%$#@ encrypted

names

interface Ethernet0

speed 100

duplex full

nameif P2P

security-level 0

no ip address

interface Ethernet1

speed 100

duplex full

nameif inside

security-level 100

ip address 192.168.1.0 255.255.255.0

http server enable

http 192.168.1.0 255.255.255.0 inside

no snmp-server location

no snmp-server contact

snmp-server community public

snmp-server enable traps snmp authentication linkup linkdown coldstart

no sysopt connection permit-ipsec

ssh timeout 5

ssh version 1

console timeout 0

class-map inspection_default

match default-inspection-traffic

policy-map global_policy

class inspection_default

inspect dns maximum-length 512

inspect ftp

inspect h323 h225

inspect h323 ras

inspect http

inspect netbios

inspect rsh

inspect rtsp

inspect skinny

inspect esmtp

inspect sqlnet

inspect sunrpc

inspect tftp

inspect sip

inspect xdmcp

service-policy global_policy global

Cryptochecksum:8ea961edd27fc9f07c64ee8d1b8411e0

: end

FIREWALL#

Re: unable to use gui

clark.d — Wed, 17 Mar 2010 11:37:39 GMT

Where is the 'asdm image flash:/asdm-512.bin' in your config?? That needs to be set in config to tell Pix to use it.

Re: unable to use gui

hyundai_mum — Wed, 17 Mar 2010 11:47:28 GMT

sorry i miss to copy that cmd from my FW

configuration

find entire OUTPUT here again

FIREWALL# show run
: Saved
:
PIX Version 7.0(4)
!
hostname FIREWALL
domain-name default.domain.invalid
enable password *************&$&@# encrypted
names
!
interface Ethernet0
speed 100
duplex full
nameif P2P
security-level 0
no ip address
!
interface Ethernet1
speed 100
duplex full
nameif inside
security-level 100
ip address 192.168.1.0 255.255.255.0
!
interface Ethernet2
speed 100
duplex full
nameif Internet
security-level 0
no ip address
!
passwd FF2EMMV7TaGoapHZ encrypted
boot system flash:/pix704.bin
ftp mode passive
pager lines 24
mtu P2P 1500
mtu inside 1500
mtu Internet 1500
ERROR: Command requires failover license
ERROR: Command requires failover license
asdm image flash:/asdm-512.bin
asdm history enable
arp timeout 14400
nat-control
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00
timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
username hyundaiadmin password PaxrDETtcTi9Dg/A encrypted
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
snmp-server enable traps snmp authentication linkup linkdown coldstart
no sysopt connection permit-ipsec
telnet 192.168.1.0 255.255.255.0 inside
telnet timeout 15
ssh timeout 5
ssh version 1
console timeout 0
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map global_policy
class inspection_default
inspect dns maximum-length 512
inspect ftp
inspect h323 h225
inspect h323 ras
inspect http
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
!
service-policy global_policy global
Cryptochecksum:8ea961edd27fc9f07c64ee8d1b8411e0
: end
FIREWALL#