topic Reg. routing issue in Network Security

Reg. routing issue

ankurs2008 — Mon, 11 Mar 2019 17:55:16 GMT

Hi halijenn / pkampana / all

I have an issue where there are overlapping networks at inside and outside of ASA hence is it possible in the ASA that i can segregate the traffic by means of routing or NATTING ?

(192.168.16.0) Router (at WAN Branch) -----Switch ---(Outside)ASA(Inside)----Switch ----Router1----Router2 (192.168.16.0)

Re: Reg. routing issue

Marcin Latosiewicz — Sun, 06 Jun 2010 07:18:48 GMT

yes, you can do it by NATing subnets.

One of the ways to do it is with outside NAT:

http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/nat_static.html#wp1082664

Possible orther include policy or straight static NAT.

Marcin

Re: Reg. routing issue

Kureli Sankar — Sun, 06 Jun 2010 11:21:39 GMT

Ankur,

I had answered a similar thread a while ago. Spent quite a bit of time coming up with the lines that he needed. Unfortunately he decided not to implement.

You can read here: https://supportforums.cisco.com/message/3046434#3046434

Refer this link: http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/nat_static.html#wp1082664

-KS

Re: Reg. routing issue

ankurs2008 — Tue, 08 Jun 2010 00:56:43 GMT

thanks a lot kusankar & Marcin !