topic Re: NAC Depolyment for wireless network in Network Security https://community.cisco.com/t5/network-security/nac-depolyment-for-wireless-network/m-p/1559472#M737620 <HTML><HEAD></HEAD><BODY><P>Vicente,</P><P></P><P>You can as long as the Wireless is L2 adjacent, you can use the same CAS for OOB Wired and Wireless.</P><P></P><P>HTH,</P><P>Faisal</P><P>--</P><P>If you find this post helpful, please rate so others can find the answer easily</P></BODY></HTML> Mon, 11 Oct 2010 18:22:28 GMT Faisal Sehbai 2010-10-11T18:22:28Z NAC Depolyment for wireless network https://community.cisco.com/t5/network-security/nac-depolyment-for-wireless-network/m-p/1559471#M737593 <P>Hi all,</P><P></P><P>I am planning to implement a NAC appliance server in one of our customers. The wired LAN is based on cisco catalyst switches and there is going to be a wireless LAN with one Wireless LAN controller and about 25 access points (all Cisco equipment). I am planning and out of band virtual gateway deployment and I wolud like to know if it is possible to control both the wired LAN and the wireless network with the same NAC CAS server&nbsp; or if I need one NAC CAS server for the wireless and one for the wired LAN.</P><P></P><P>Regards</P> Fri, 21 Feb 2020 12:06:51 GMT https://community.cisco.com/t5/network-security/nac-depolyment-for-wireless-network/m-p/1559471#M737593 vicente.madrigal 2020-02-21T12:06:51Z Re: NAC Depolyment for wireless network https://community.cisco.com/t5/network-security/nac-depolyment-for-wireless-network/m-p/1559472#M737620 <HTML><HEAD></HEAD><BODY><P>Vicente,</P><P></P><P>You can as long as the Wireless is L2 adjacent, you can use the same CAS for OOB Wired and Wireless.</P><P></P><P>HTH,</P><P>Faisal</P><P>--</P><P>If you find this post helpful, please rate so others can find the answer easily</P></BODY></HTML> Mon, 11 Oct 2010 18:22:28 GMT https://community.cisco.com/t5/network-security/nac-depolyment-for-wireless-network/m-p/1559472#M737620 Faisal Sehbai 2010-10-11T18:22:28Z