topic Re: ASA 5505 in Network Security https://community.cisco.com/t5/network-security/asa-5505/m-p/1377847#M738036 <HTML><HEAD></HEAD><BODY><P>All of your assumptions are correct and you're also right about assigning a physical port to the 'outside' vlan.</P></BODY></HTML> Fri, 29 Jan 2010 16:51:46 GMT Collin Clark 2010-01-29T16:51:46Z ASA 5505 https://community.cisco.com/t5/network-security/asa-5505/m-p/1377846#M738027 <P>Hello,</P><P></P><P>We are ordering a ASA 5505 for a small remote office of 10 users and I will set up a VPn to our HQ.&nbsp; I have never used this lower model before (only the 5510/5520) so I wondered do I just assign one of the 8 ports as the 'outside' and put it in the VLAN where the lease line router is and one as the 'inside' and connect to the office vlan switch?&nbsp; The just do the usual settings of IP address and security levels.</P><P></P><P>I assume it just the same as sessing up a 5510/5520?</P><P></P><P></P><P>Thanks</P> Mon, 11 Mar 2019 17:03:13 GMT https://community.cisco.com/t5/network-security/asa-5505/m-p/1377846#M738027 Andy White 2019-03-11T17:03:13Z Re: ASA 5505 https://community.cisco.com/t5/network-security/asa-5505/m-p/1377847#M738036 <HTML><HEAD></HEAD><BODY><P>All of your assumptions are correct and you're also right about assigning a physical port to the 'outside' vlan.</P></BODY></HTML> Fri, 29 Jan 2010 16:51:46 GMT https://community.cisco.com/t5/network-security/asa-5505/m-p/1377847#M738036 Collin Clark 2010-01-29T16:51:46Z