topic Re: Certified Timer problem on NAC v4.7.2 in Network Security

Certified Timer problem on NAC v4.7.2

s.demosthenous — Fri, 21 Feb 2020 12:06:31 GMT

Hello,

I have upgraded a NAC server pair from v4.1.3 to v4.7.2.Before the upgrade the upgrade the Cerified timer was working and all the clients were removed each day at a specified time.After the upgrade the timer is not working properly.Each day i have to manually removed the cerified.

Any help?

Thank you,

Stratos Demosthenous

Re: Certified Timer problem on NAC v4.7.2

Faisal Sehbai — Wed, 06 Oct 2010 16:51:37 GMT

Stratos,

Did you verify after the upgrade that there weren't any database errors? This can be done by running the showstate.sh script (as detailed in the upgrade notes)

HTH,

Faisal

If you find this post helpful, please rate so others can find the answer easily

Re: Certified Timer problem on NAC v4.7.2

s.demosthenous — Mon, 25 Oct 2010 08:28:09 GMT

Hello Faisal,

I have switch to the CAM secondary appliance and the Certified timer is working fine now.

I will check for DB errors and move back to CAM primary to verify.

Thank you,

Stratos Demosthenous