https://community.cisco.com/t5/network-security/enable-pathping-across-appliance/m-p/1204731#M77131 <P>I am trying to do a Pathping across my network from inside to an external address.</P><P></P><P>I am foxed as to what I can do - it is the ASA that is blocking it.</P><P></P><P>Ping and Tracert does not work either</P> Sun, 10 Mar 2019 11:37:47 GMT mawallace 2019-03-10T11:37:47Z https://community.cisco.com/t5/network-security/enable-pathping-across-appliance/m-p/1204731#M77131 <P>I am trying to do a Pathping across my network from inside to an external address.</P><P></P><P>I am foxed as to what I can do - it is the ASA that is blocking it.</P><P></P><P>Ping and Tracert does not work either</P> Sun, 10 Mar 2019 11:37:47 GMT https://community.cisco.com/t5/network-security/enable-pathping-across-appliance/m-p/1204731#M77131 mawallace 2019-03-10T11:37:47Z https://community.cisco.com/t5/network-security/enable-pathping-across-appliance/m-p/1204732#M77132 <HTML><HEAD></HEAD><BODY><P>Internet Control Message Protocol (ICMP) pings and traceroute on the PIX Firewall are handled differently based on the version of PIX and ASA code.Inbound ICMP through the PIX/ASA is denied by default. Outbound ICMP is permitted, but the incoming reply is denied by default.ASA/PIX does not support ICMP redirects, because it does not support asymmetric routing.</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094e8a.shtml#topic2" target="_blank">http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094e8a.shtml#topic2</A></P><P></P></BODY></HTML> Thu, 21 May 2009 13:40:13 GMT https://community.cisco.com/t5/network-security/enable-pathping-across-appliance/m-p/1204732#M77132 vkapoor5 2009-05-21T13:40:13Z