topic Re: Requirements for IOS IPS in Network Security https://community.cisco.com/t5/network-security/requirements-for-ios-ips/m-p/1151937#M77202 <HTML><HEAD></HEAD><BODY><P>You don't need hardware to run IOS IPS (beyong a router with enough DRAM, obviously), but to run the v5 sigs, you'll need Cisco IOS Software version 12.4(11)T or later. Your router is running a mainline image, as shown by your mention of the "...124-19.bin" filename.</P></BODY></HTML> Thu, 07 May 2009 19:23:06 GMT bstiff 2009-05-07T19:23:06Z Requirements for IOS IPS https://community.cisco.com/t5/network-security/requirements-for-ios-ips/m-p/1151936#M77200 <P>Dear all,</P><P>i would like to use IOS IPS 5.x format. </P><P></P><P>the show subsys name ips gives me following output</P><P>ips protocol 2.001.001</P><P></P><P>i have this image installed</P><P>flash:c2800nm-adventerprisek9-mz.124-19.bin"</P><P></P><P></P><P>But it seems in my IOS Version there are some commands missing. </P><P>ip ips signature-category </P><P>ip ips location</P><P></P><P>Do i need hardware for IPS v5?</P><P></P><P>Thanks for your hints</P><P></P><P>Alex</P><P></P> Sun, 10 Mar 2019 11:37:06 GMT https://community.cisco.com/t5/network-security/requirements-for-ios-ips/m-p/1151936#M77200 alex.dersch 2019-03-10T11:37:06Z Re: Requirements for IOS IPS https://community.cisco.com/t5/network-security/requirements-for-ios-ips/m-p/1151937#M77202 <HTML><HEAD></HEAD><BODY><P>You don't need hardware to run IOS IPS (beyong a router with enough DRAM, obviously), but to run the v5 sigs, you'll need Cisco IOS Software version 12.4(11)T or later. Your router is running a mainline image, as shown by your mention of the "...124-19.bin" filename.</P></BODY></HTML> Thu, 07 May 2009 19:23:06 GMT https://community.cisco.com/t5/network-security/requirements-for-ios-ips/m-p/1151937#M77202 bstiff 2009-05-07T19:23:06Z