topic Re: IDS/IPS detects outgoing traffic? in Network Security https://community.cisco.com/t5/network-security/ids-ips-detects-outgoing-traffic/m-p/1186554#M77417 <HTML><HEAD></HEAD><BODY><P>Hey-</P><P>I am not an expert by any means, but I have a 4215 and I think it has to do with the egress/Ingress setting. If I remember correctly the switch that my 4215 is plugged into you have to set egress/ingress on each port you have to monitor?</P><P>Ingress and Egress = Entrance and departure</P><P></P><P>Hope this helps</P></BODY></HTML> Mon, 30 Mar 2009 20:27:01 GMT operations 2009-03-30T20:27:01Z IDS/IPS detects outgoing traffic? https://community.cisco.com/t5/network-security/ids-ips-detects-outgoing-traffic/m-p/1186553#M77416 <P>I have 4215 appliance that I'm trying to get working. It's only logging the outbound traffic. I'm not sure what I need to configure to have it log the incoming traffic (which is what I thought the device was intended to do). Any/all ideas would be greatly helpful to me.</P><P></P><P>Thanks!</P> Sun, 10 Mar 2019 11:34:14 GMT https://community.cisco.com/t5/network-security/ids-ips-detects-outgoing-traffic/m-p/1186553#M77416 caseym 2019-03-10T11:34:14Z Re: IDS/IPS detects outgoing traffic? https://community.cisco.com/t5/network-security/ids-ips-detects-outgoing-traffic/m-p/1186554#M77417 <HTML><HEAD></HEAD><BODY><P>Hey-</P><P>I am not an expert by any means, but I have a 4215 and I think it has to do with the egress/Ingress setting. If I remember correctly the switch that my 4215 is plugged into you have to set egress/ingress on each port you have to monitor?</P><P>Ingress and Egress = Entrance and departure</P><P></P><P>Hope this helps</P></BODY></HTML> Mon, 30 Mar 2009 20:27:01 GMT https://community.cisco.com/t5/network-security/ids-ips-detects-outgoing-traffic/m-p/1186554#M77417 operations 2009-03-30T20:27:01Z