topic ipsec vpn configuration in ADSL line in Network Security

ipsec vpn configuration in ADSL line

zeuscyril — Mon, 11 Mar 2019 16:41:24 GMT

my diagram is

isp line---adsl router(dynamic ip)--- asa5505----vpntunnel---- asa5520(static ip)

i connected from ADSL to asa5505 so adsl local is 192.168.1.0 network and asa 5505 outside also the same network

so i need to configure site to site vpn between two asa ..

so i need to route any traffic on router or it will automatically route the vpn traffic in ADSL line side.

Re: ipsec vpn configuration in ADSL line

spremkumar — Mon, 23 Nov 2009 06:09:07 GMT

The schematic which you have posted is not clear, can you make a sample diagram and post it out here with your requirement.

regds

Re: ipsec vpn configuration in ADSL line

zeuscyril — Tue, 24 Nov 2009 07:54:46 GMT

hi prem,

i got the solution by own.

but i am having one doubt ,

my tunnel is up i can communicate both the sides but my "sh crypto isakmp sa " showing status as MM_Active is not showing QM_IDLE

why it is like that it ll give any problems on vpn or what is the reason for that?.

Re: ipsec vpn configuration in ADSL line

grant.maynard — Tue, 24 Nov 2009 18:18:11 GMT

i think this is just a difference in the OS: v6.3 shows QM_IDLE while v7.x shows MM_ACTIVE.

Nothing to worry about.

Re: ipsec vpn configuration in ADSL line

zeuscyril — Wed, 25 Nov 2009 05:39:39 GMT

hi all,

i need configure 17 sites site to site vpn one place is central that is having static ip all other sites are dynamic ip .

so i created dynamic map in centeral asa 5520 , so i need to create 17 different vpn profile for the sites or one profile is enough to get connect with the sites.