topic IPS 4240 & CSM in Network Security https://community.cisco.com/t5/network-security/ips-4240-csm/m-p/1144523#M77880 <P>What is the highest IPS 4240 engine that CSM will support? My IPS is presently at 6.01(E2)and CSM is 3.2.2. Can I upgrade to E3 and still have CSM manage the sensor?</P> Sun, 10 Mar 2019 11:28:17 GMT jthomp7626 2019-03-10T11:28:17Z IPS 4240 & CSM https://community.cisco.com/t5/network-security/ips-4240-csm/m-p/1144523#M77880 <P>What is the highest IPS 4240 engine that CSM will support? My IPS is presently at 6.01(E2)and CSM is 3.2.2. Can I upgrade to E3 and still have CSM manage the sensor?</P> Sun, 10 Mar 2019 11:28:17 GMT https://community.cisco.com/t5/network-security/ips-4240-csm/m-p/1144523#M77880 jthomp7626 2019-03-10T11:28:17Z Re: IPS 4240 & CSM https://community.cisco.com/t5/network-security/ips-4240-csm/m-p/1144524#M77881 <HTML><HEAD></HEAD><BODY><P>Yes, CSM 3.2.2 can manage E3 sensors.</P><P></P><P>However, your 6.0(1)E2 sensor can not be upgraded to a 6.0(1)E3 sensor. E3 does not exist for 6.0(1).</P><P></P><P>Instead your 6.0(1)E2 sensor must be upgraded to one of the following:</P><P>6.0(5)E3, or 6.1(2)E3.</P><P></P><P>NOTE: There is also a 6.2(1)E3, but I am not sure if it can be managed by CSM 3.2.2. The other 2 versions I mentioned CAN be managed by CSM 3.2.2.</P><P></P><P>When using CSM for configuration management of the sensor, it is best to use CSM to download the files from cisco.com and push them to the sensor.</P><P></P><P></P></BODY></HTML> Thu, 22 Jan 2009 00:02:37 GMT https://community.cisco.com/t5/network-security/ips-4240-csm/m-p/1144524#M77881 marcabal 2009-01-22T00:02:37Z Re: IPS 4240 & CSM https://community.cisco.com/t5/network-security/ips-4240-csm/m-p/1144525#M77883 <HTML><HEAD></HEAD><BODY><P>Thank you very much Marcoa!</P></BODY></HTML> Thu, 22 Jan 2009 00:44:48 GMT https://community.cisco.com/t5/network-security/ips-4240-csm/m-p/1144525#M77883 jthomp7626 2009-01-22T00:44:48Z