topic ASA LAN Based Failover in Network Security

ASA LAN Based Failover

AdnanShahid — Mon, 11 Mar 2019 16:24:13 GMT

Hi,

I am using ASA 5540 and trying to implement LAN Based Active/Standby Failover using Management Interface. It seems that failover is possible but not the Stateful failover. Can anybody confirm me... about it that using Mngt interface I can not do Stateful Failover??

Thanks in Advance.

Adnan

Re: ASA LAN Based Failover

Kureli Sankar — Thu, 08 Oct 2009 03:13:26 GMT

You should be able to configure stateful failover with the ASA5540s. This is not supported only in the ASA5505s.

Pls. follow this link for sample config.

http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/failover.html#wp1064158

Re: ASA LAN Based Failover

savgoust — Thu, 08 Oct 2009 04:53:17 GMT

Hi Adnan,

To use the management interface for non-management traffic, you need to

remove the command 'management-only' from the interface configuration.

At that point you should be able to use that interface like any other

hth

Stefan