topic Re: NAC don't insert CAS. in Network Security https://community.cisco.com/t5/network-security/nac-don-t-insert-cas/m-p/1352980#M780736 <HTML><HEAD></HEAD><BODY><P>Posting resolution for the record: Customer had bad licenses as they were issued to the MAC addres of the CASs. Licenses are always supposed to be issued to the MAC address of the CAM.</P></BODY></HTML> Sat, 20 Mar 2010 18:37:53 GMT Faisal Sehbai 2010-03-20T18:37:53Z NAC don't insert CAS. https://community.cisco.com/t5/network-security/nac-don-t-insert-cas/m-p/1352978#M780664 <P>Hi,</P><P></P><P></P><P>I have a problem when go to insert a Nac Server in our Nac Manager the message that appear is "Failed to add server: Maximum limit for Clean Access Servers supported has been reached " but I don´t have any Server yet in this Nac Manager.</P><P></P><P>Anybody have an idea?</P><P></P><P>Regards,</P><P></P><P>Wagner Silveira</P> Fri, 21 Feb 2020 11:54:25 GMT https://community.cisco.com/t5/network-security/nac-don-t-insert-cas/m-p/1352978#M780664 wsilveira 2020-02-21T11:54:25Z Re: NAC don't insert CAS. https://community.cisco.com/t5/network-security/nac-don-t-insert-cas/m-p/1352979#M780714 <HTML><HEAD></HEAD><BODY><P>Please check if you have license for the CAS on your CAM.</P><P></P><P>You would need to have 2 license installed on the CAM:</P><P>- 1 for the CAM itself</P><P>- another one for CAS (how many CAS you can add to the CAM)</P><P></P><P>Here is more information on Clean Access licensing:</P><P><A class="jive-link-external-small" href="http://www.cisco.com/en/US/docs/security/nac/appliance/support_guide/license.html">http://www.cisco.com/en/US/docs/security/nac/appliance/support_guide/license.html</A></P></BODY></HTML> Fri, 19 Mar 2010 04:30:57 GMT https://community.cisco.com/t5/network-security/nac-don-t-insert-cas/m-p/1352979#M780714 Jennifer Halim 2010-03-19T04:30:57Z Re: NAC don't insert CAS. https://community.cisco.com/t5/network-security/nac-don-t-insert-cas/m-p/1352980#M780736 <HTML><HEAD></HEAD><BODY><P>Posting resolution for the record: Customer had bad licenses as they were issued to the MAC addres of the CASs. Licenses are always supposed to be issued to the MAC address of the CAM.</P></BODY></HTML> Sat, 20 Mar 2010 18:37:53 GMT https://community.cisco.com/t5/network-security/nac-don-t-insert-cas/m-p/1352980#M780736 Faisal Sehbai 2010-03-20T18:37:53Z