topic Re: 4255 ips at 100% CPU in Network Security https://community.cisco.com/t5/network-security/4255-ips-at-100-cpu/m-p/1111769#M78155 <HTML><HEAD></HEAD><BODY><P>What is the command to view the load stat?</P></BODY></HTML> Mon, 22 Dec 2008 15:07:16 GMT mprescher 2008-12-22T15:07:16Z 4255 ips at 100% CPU https://community.cisco.com/t5/network-security/4255-ips-at-100-cpu/m-p/1111767#M78153 <P>I've just upgraded from 6.1.1 E2 to 6.2.1 E3 and the CPU usage has jumped from 43% to almost 100% constantly. The sig has changed from 340 to 369, but everything else is the same on the unit. Has anyone else found this? </P> Sun, 10 Mar 2019 11:24:47 GMT https://community.cisco.com/t5/network-security/4255-ips-at-100-cpu/m-p/1111767#M78153 len.holloway 2019-03-10T11:24:47Z Re: 4255 ips at 100% CPU https://community.cisco.com/t5/network-security/4255-ips-at-100-cpu/m-p/1111768#M78154 <HTML><HEAD></HEAD><BODY><P>We had the same issue going from 6.0(5)E2 to E3 on all machines. Basically sensorapp utilizes more CPU cycles, I believe, making the CPU stat fairly meaningless. There is a load statistic that more accurately refects whats going on in 6.1.X and 6.2</P><P></P></BODY></HTML> Wed, 17 Dec 2008 22:10:06 GMT https://community.cisco.com/t5/network-security/4255-ips-at-100-cpu/m-p/1111768#M78154 garreri 2008-12-17T22:10:06Z Re: 4255 ips at 100% CPU https://community.cisco.com/t5/network-security/4255-ips-at-100-cpu/m-p/1111769#M78155 <HTML><HEAD></HEAD><BODY><P>What is the command to view the load stat?</P></BODY></HTML> Mon, 22 Dec 2008 15:07:16 GMT https://community.cisco.com/t5/network-security/4255-ips-at-100-cpu/m-p/1111769#M78155 mprescher 2008-12-22T15:07:16Z