topic Re: IDSM - Configuration Synchronization in Network Security https://community.cisco.com/t5/network-security/idsm-configuration-synchronization/m-p/1120983#M78287 <HTML><HEAD></HEAD><BODY><P></P><P>If I were to take a backup of IDSM1 and upload it into the other IDSM2, will the configurations on IDSM2 be 100% duplicate or something may fail or get missed. </P><P></P><P>This includes all the signature settings and fine-tuning other than the default.</P><P></P><P>Please respond to the same for AIP-SSM module as well. </P><P></P><P>Thanks.</P></BODY></HTML> Sat, 22 Nov 2008 11:28:08 GMT new_networker 2008-11-22T11:28:08Z IDSM - Configuration Synchronization https://community.cisco.com/t5/network-security/idsm-configuration-synchronization/m-p/1120981#M78285 <P></P><P>Is it possible to synchronize the IDSM configuration between the two IDSMs installed on the two independent chassis. </P> Sun, 10 Mar 2019 11:23:20 GMT https://community.cisco.com/t5/network-security/idsm-configuration-synchronization/m-p/1120981#M78285 new_networker 2019-03-10T11:23:20Z Re: IDSM - Configuration Synchronization https://community.cisco.com/t5/network-security/idsm-configuration-synchronization/m-p/1120982#M78286 <HTML><HEAD></HEAD><BODY><P>No. You have to either do it manually or use Cisco Security Manager AFAIK.</P><P></P><P>All customers should push Cisco to give 'real' failover/high avail. support.</P><P></P><P>Regards</P><P></P><P>Farrukh</P></BODY></HTML> Sat, 22 Nov 2008 10:42:24 GMT https://community.cisco.com/t5/network-security/idsm-configuration-synchronization/m-p/1120982#M78286 Farrukh Haroon 2008-11-22T10:42:24Z Re: IDSM - Configuration Synchronization https://community.cisco.com/t5/network-security/idsm-configuration-synchronization/m-p/1120983#M78287 <HTML><HEAD></HEAD><BODY><P></P><P>If I were to take a backup of IDSM1 and upload it into the other IDSM2, will the configurations on IDSM2 be 100% duplicate or something may fail or get missed. </P><P></P><P>This includes all the signature settings and fine-tuning other than the default.</P><P></P><P>Please respond to the same for AIP-SSM module as well. </P><P></P><P>Thanks.</P></BODY></HTML> Sat, 22 Nov 2008 11:28:08 GMT https://community.cisco.com/t5/network-security/idsm-configuration-synchronization/m-p/1120983#M78287 new_networker 2008-11-22T11:28:08Z Re: IDSM - Configuration Synchronization https://community.cisco.com/t5/network-security/idsm-configuration-synchronization/m-p/1120984#M78288 <HTML><HEAD></HEAD><BODY><P>I think it should be OK to do it this way, but just make sure both IDSM's have a diferent hostname and IP Address.</P><P></P><P>Also if you added the Sensors key to some device (for example during blocking) make sure you add both sensors to the blocking device.</P><P></P><P>Regards</P><P></P><P>Farrukh</P></BODY></HTML> Sat, 22 Nov 2008 11:38:23 GMT https://community.cisco.com/t5/network-security/idsm-configuration-synchronization/m-p/1120984#M78288 Farrukh Haroon 2008-11-22T11:38:23Z