topic Re: IPS design question in Network Security https://community.cisco.com/t5/network-security/ips-design-question/m-p/1092121#M78452 <HTML><HEAD></HEAD><BODY><P>With inline vlan pair only one IPS interface is utilized (it has to be a trunk), have a look at:</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/sw/secursw/ps2113/products_configuration_example09186a0080876d9f.shtml" target="_blank">http://www.cisco.com/en/US/products/sw/secursw/ps2113/products_configuration_example09186a0080876d9f.shtml</A></P><P></P><P>Regards</P><P></P><P>Farrukh</P></BODY></HTML> Tue, 04 Nov 2008 12:35:04 GMT Farrukh Haroon 2008-11-04T12:35:04Z IPS design question https://community.cisco.com/t5/network-security/ips-design-question/m-p/1092120#M78450 <P>Hi All, </P><P>I have two ASA as active/standby failover. these two are connected to 3750 switch through trunk port that carry vlan 10,20 and 30. I want to deploy IPS in between with inline mode. I am little confuse how to connect IPS here. should it be connected with both two ports to switch, or it should be connected to ASA from one end and then connected to switch with another end. </P><P></P><P>If you show me how to connect IPS here, that would be very appreciated. </P><P>thanks </P><P>Alex</P><P></P> Sun, 10 Mar 2019 11:21:25 GMT https://community.cisco.com/t5/network-security/ips-design-question/m-p/1092120#M78450 alex goshtaei 2019-03-10T11:21:25Z Re: IPS design question https://community.cisco.com/t5/network-security/ips-design-question/m-p/1092121#M78452 <HTML><HEAD></HEAD><BODY><P>With inline vlan pair only one IPS interface is utilized (it has to be a trunk), have a look at:</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/sw/secursw/ps2113/products_configuration_example09186a0080876d9f.shtml" target="_blank">http://www.cisco.com/en/US/products/sw/secursw/ps2113/products_configuration_example09186a0080876d9f.shtml</A></P><P></P><P>Regards</P><P></P><P>Farrukh</P></BODY></HTML> Tue, 04 Nov 2008 12:35:04 GMT https://community.cisco.com/t5/network-security/ips-design-question/m-p/1092121#M78452 Farrukh Haroon 2008-11-04T12:35:04Z