topic help on 4240 in Network Security

help on 4240

peterhkim — Sun, 10 Mar 2019 11:19:42 GMT

I'm pretty new on IPS. I'm trying to put 4240 IPS between my ourter router and FW. Can I connect g0/0 to router and g0/1 to FW? What interface mode should it be running? Is there any other way to do this? I was trying to find some sample config on Cisco website. No luck so far...

Thanks.

Re: help on 4240

suschoud — Tue, 14 Oct 2008 17:15:16 GMT

link below is the nearest match :

http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps4077/products_configuration_example09186a00809c37cb.shtml

Do rate of helpful.

Regards,

Sushil

Re: help on 4240

Farrukh Haroon — Tue, 14 Oct 2008 17:54:29 GMT

These are direct links in case you can't access the first one:

http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_configuration_example09186a00809c37cb.shtml

http://www.cisco.com/application/pdf/paws/107540/ips5x-inline-mode-config.pdf

Regards

Farrukh