topic Re: ASA switching over from Active to stanby in Network Security https://community.cisco.com/t5/network-security/asa-switching-over-from-active-to-stanby/m-p/1253105#M793002 <HTML><HEAD></HEAD><BODY><P>What does the show fail command show about the standby firewall?</P><P>Is this a LAN based failover?</P><P>Make sure that you see traffic from the other firewall on the sync interface (dont look at interface stats, do a capture).</P></BODY></HTML> Wed, 30 Sep 2009 16:59:00 GMT jeromecandiff 2009-09-30T16:59:00Z ASA switching over from Active to stanby https://community.cisco.com/t5/network-security/asa-switching-over-from-active-to-stanby/m-p/1253102#M792999 <P>If I shuthown a monitored physical interface, the active ASA doesn't swtich over to standby. </P><P></P><P>Shutdown also brings the communication down. It should also be considered as reason to trigger the failover.</P><P></P><P></P><P></P><P></P> Mon, 11 Mar 2019 16:21:25 GMT https://community.cisco.com/t5/network-security/asa-switching-over-from-active-to-stanby/m-p/1253102#M792999 kicharle 2019-03-11T16:21:25Z Re: ASA switching over from Active to stanby https://community.cisco.com/t5/network-security/asa-switching-over-from-active-to-stanby/m-p/1253103#M793000 <HTML><HEAD></HEAD><BODY><P>check your failover config...</P></BODY></HTML> Wed, 30 Sep 2009 14:46:25 GMT https://community.cisco.com/t5/network-security/asa-switching-over-from-active-to-stanby/m-p/1253103#M793000 indra 2009-09-30T14:46:25Z Re: ASA switching over from Active to stanby https://community.cisco.com/t5/network-security/asa-switching-over-from-active-to-stanby/m-p/1253104#M793001 <HTML><HEAD></HEAD><BODY><P>Here's a link that should help.</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/ha_active_standby.html" target="_blank">http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/ha_active_standby.html</A></P></BODY></HTML> Wed, 30 Sep 2009 15:07:22 GMT https://community.cisco.com/t5/network-security/asa-switching-over-from-active-to-stanby/m-p/1253104#M793001 Collin Clark 2009-09-30T15:07:22Z Re: ASA switching over from Active to stanby https://community.cisco.com/t5/network-security/asa-switching-over-from-active-to-stanby/m-p/1253105#M793002 <HTML><HEAD></HEAD><BODY><P>What does the show fail command show about the standby firewall?</P><P>Is this a LAN based failover?</P><P>Make sure that you see traffic from the other firewall on the sync interface (dont look at interface stats, do a capture).</P></BODY></HTML> Wed, 30 Sep 2009 16:59:00 GMT https://community.cisco.com/t5/network-security/asa-switching-over-from-active-to-stanby/m-p/1253105#M793002 jeromecandiff 2009-09-30T16:59:00Z