topic Zone Based firewall issue in Network Security https://community.cisco.com/t5/network-security/zone-based-firewall-issue/m-p/1249607#M793012 <P>I have an 1811 with an old cfg on it. i want to update it to use zone based rules.</P><P>However the SDM is telling me that the legacy firewall is in place, and I need to remove them.</P><P>i am a security nad routing newbie. Can some one point me in the right direction ?</P><P>I have attached the relevent parts</P><P></P><P> </P><P></P> Mon, 11 Mar 2019 16:21:08 GMT leslie-meade 2019-03-11T16:21:08Z Zone Based firewall issue https://community.cisco.com/t5/network-security/zone-based-firewall-issue/m-p/1249607#M793012 <P>I have an 1811 with an old cfg on it. i want to update it to use zone based rules.</P><P>However the SDM is telling me that the legacy firewall is in place, and I need to remove them.</P><P>i am a security nad routing newbie. Can some one point me in the right direction ?</P><P>I have attached the relevent parts</P><P></P><P> </P><P></P> Mon, 11 Mar 2019 16:21:08 GMT https://community.cisco.com/t5/network-security/zone-based-firewall-issue/m-p/1249607#M793012 leslie-meade 2019-03-11T16:21:08Z Re: Zone Based firewall issue https://community.cisco.com/t5/network-security/zone-based-firewall-issue/m-p/1249608#M793053 <HTML><HEAD></HEAD><BODY><P>To enable SDM to configure ZBF, you need to remove ip inspect rule that is associated to all interfaces in router. </P><P></P><P>Refresh SDM, you will see ZBF UI. </P></BODY></HTML> Wed, 30 Sep 2009 03:35:09 GMT https://community.cisco.com/t5/network-security/zone-based-firewall-issue/m-p/1249608#M793053 kicharle 2009-09-30T03:35:09Z