topic Re: Can't get 5510 to talk to ssm-10 in Network Security

Can't get 5510 to talk to ssm-10

ktwaddell — Mon, 11 Mar 2019 16:07:39 GMT

Trying to get the asdm to talk to the ips card, I click on the tab, confirm the ip address, but it never talks with the card and never has.

Any helps please guys?

Thanks

Kev

Re: Can't get 5510 to talk to ssm-10

acomiskey — Wed, 19 Aug 2009 14:08:25 GMT

Do you have something like this in the ssm??

service-host

network-settings

access-list /32

access-list 0.0.0.0/0

Re: Can't get 5510 to talk to ssm-10

ktwaddell — Wed, 19 Aug 2009 14:29:48 GMT

I have access-list 0.0.0.0/0 on it just rule out any acl issues.

Thsi might seem a stupid question but do I need to use the management port on the ssm for the asdm to see it, I assumed the asdm could just talk to ssm card.

Tahnks

kev

Re: Can't get 5510 to talk to ssm-10

acomiskey — Wed, 19 Aug 2009 14:35:05 GMT

You can session to the card via the cli without the interface but I think you need to actually use the interface to see it through asdm.

Re: Can't get 5510 to talk to ssm-10

ktwaddell — Wed, 19 Aug 2009 14:40:25 GMT

oh yes I've clearly sessioned on to it, but I just expected the asdm to be able to see the card and work, but having found a post about 10 minutes ago of a guy that had cabled it up and no one pulled him on it.

Re: Can't get 5510 to talk to ssm-10

ktwaddell — Thu, 20 Aug 2009 09:44:49 GMT

To confirm it was because we hadn't cabled up the management port ont he same vlan as the asa, we always expected the asdm to work with e ssm-10 inline.

Thanks

Kev