NAC OOB Configuration

mamaral — Fri, 21 Feb 2020 12:11:59 GMT

Hi!

I'm implementing an NAC oob solution. tTe CAS and CAM are in the Data-center on an remote network, and i need to control the vlan's that my users access on my remote sites.

How do i make them authenticate on the remote CAS? (the Cas is on an remote network)

TKX

Miguel

Re: NAC OOB Configuration

Tiago Antunes — Wed, 29 Dec 2010 08:48:52 GMT

Hi,

Well, it looks like you are starting now, so I would advise to get in touch with the OOB concept and guidelines:

http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cam/m_oob.html.

You have L2/L3 mode.

You have OOB/InB mode.

You have Real-Ip/Virtual gateway mode.

You have 2 main VLANs for the clients: authentication (untrusted) and access (trusted) vlans.

The goal is to make the client fall into the auth vlan prior to login, and the traffic flow through the CAS so that the CAS can permit/deny the client from passing traffic.

You have also, nice chalk-talks where you can see VODs explaining the steps for configuring several features/deployments:

http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5707/ps8418/ps6128/prod_presentation0900aecd80549168.html.

HTH,
Tiago

If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Re: NAC OOB Configuration

mamaral — Wed, 29 Dec 2010 12:12:33 GMT

Hi,

TKX Tiago,

The documentation that you recomended was very useful!!!

Best regard's,

Miguel

topic Re: NAC OOB Configuration in Network Security

NAC OOB Configuration

Re: NAC OOB Configuration

Re: NAC OOB Configuration