topic Re: DB error for NAC Profiler in Network Security

DB error for NAC Profiler

shairolbit — Fri, 21 Feb 2020 12:07:34 GMT

hi all,

This first time i touch nac appliance so i need guide from you all.

1- DB error Profiler using version 2.1.8.37 factory default version .

.2- Try access using GUI https://ip_profiler and appear DB error .

4- Profiler license for HA .

5- this DB error appear at second for primary profiler not ready configure.

Re: DB error for NAC Profiler

Tiago Antunes — Tue, 19 Oct 2010 15:17:25 GMT

Hi,

Do you get this messages after login?

If yes, then I would do the following:

1 - Do the GUI password recovery and try to login with the new account: https://supportforums.cisco.com/message/3204663#3204663.

2 - If the new user still gets the same problem, you can go deep troubleshooting or simply re-image the box...if you have not configured nothing yet...i would simply reimage the Profiler and consider using the 3.1.x version which is much more user friendly.

HTH,

Tiago

If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Re: DB error for NAC Profiler

shairolbit — Wed, 03 Nov 2010 19:03:23 GMT

hi ,

Now my problem for DB error solve but i have another problem

1- needed upgrade version profiler 2.x.x to the latest version 3.x..x .My problem is when using putty.exe or winscp328.exe to access the profiler using ssh ,failed access to profiler .

2-Reset configuration and change the new username & password but still same can't log in using putty or winscp328 but successful using https://ip_profiler

3- here my step reconfigure factory for profiler .

1-/root/.resetProfiler factory

2-reconfigure all database profiler

Changing the beacon and root system user account password

1-passwd beacon -change the beacon password (cisco123)

2- Passwd root - change the root password (cisco123)

any idea ?

Re: DB error for NAC Profiler

Lauren Sullivan — Fri, 05 Nov 2010 10:52:59 GMT

Are you trying to login to the Profiler via SSH as the beacon user?

Re: DB error for NAC Profiler

shairolbit — Sun, 07 Nov 2010 04:47:04 GMT

hi ,

1-upgrade version profiler 3.1.x.x .ISO file boot from CD.

2-after completed upgrade version i can access using https,

3-but when i try access using putty or winscp prompt error " Using Keyboard -interactive authenticate "

4-tired type username & password but still can't access

5-i try change the new username and password but still can't access

any idea ?

Re: DB error for NAC Profiler

Faisal Sehbai — Mon, 08 Nov 2010 03:12:34 GMT

Hello,

You can't login to the profiler using the root user. You have to login as beacon, issue the "su" command, and then put in the root password to make yourself root.

HTH,

Faisal

If you find this post helpful, please rate so others can find the answer easily