topic Re: https port-forwarding in Network Security

https port-forwarding

winanjaya — Mon, 11 Mar 2019 16:56:20 GMT

I am trying to https (443) port-forwarding.. tried below, but not working ;>(

static (inside,outside) tcp X.X.X.X https I.I.I.I https netmask 255.255.255.255 0 0
access-list inbound_filter permit tcp any host X.X.X.X eq https
clear xlate
wr m

what I missed? .. is there any difference method for doing https port-forwarding?

Re: https port-forwarding

trustcisco — Tue, 12 Jan 2010 08:31:21 GMT

The configuration is correct.

Is the https service running on the server ?

Re: https port-forwarding

Ganesh Hariharan — Tue, 12 Jan 2010 09:46:20 GMT

Hi,

Check out the https services are running or not !!

Regards

Ganesh.H

Re: https port-forwarding

sainair — Wed, 13 Jan 2010 00:05:58 GMT

Hi,

Is the access-list inbound_filter applied to the outside interface.

Check for the command: access-group inbound_filter in interface outside

If the above mentioned command is present with the configuration that you mentioned, then you need to check the https services on the server. Also, check if you see hit counts on the access-list.

Thanks,

Sai

Re: https port-forwarding

Kureli Sankar — Wed, 13 Jan 2010 00:34:26 GMT

What is the IP address? Is it the interface IP address? If so you need to use the keyword "interface" and not IP address x.x.x.x.

If it is the interface then do you have asdm enabled on the same port? If so, this traffic is destined TO the box and not THROUGH the box.

-KS

Re: https port-forwarding

winanjaya — Wed, 13 Jan 2010 00:51:14 GMT

Hello all,

Thanks a lot!.. this already resolved.. the problem occurs because the http server not configured correctly..

regards

Winanjaya