topic Re: EIGRP on ASA in Network Security https://community.cisco.com/t5/network-security/eigrp-on-asa/m-p/1296415#M802320 <HTML><HEAD></HEAD><BODY><P>Yes, and it works great on a cisco router running v12. I'm trying to find the same command (or equivalent) on an ASA appliance running 8.0(3).</P></BODY></HTML> Sat, 05 Sep 2009 01:59:44 GMT jeffland_98 2009-09-05T01:59:44Z EIGRP on ASA https://community.cisco.com/t5/network-security/eigrp-on-asa/m-p/1296413#M802312 <P>I have an ASA 5520 on which I've enabled EIGRP. There are two routers to which it is a neighbor and these have equal cost distance to a network across the network. The network will automatically load-balance but the default is on a per destination basis. I would like to have it load balance on a per packet basis as we have one large load to the same destination. On the router IOS v12.4 there is a way to change this on a per interface basis (ip load-balance per-packet) but I haven't found the equivalent command in the ASA sw v 8.0(3). Does anyone know if there is such a command or another way to achieve this? Thanks.</P> Mon, 11 Mar 2019 16:11:09 GMT https://community.cisco.com/t5/network-security/eigrp-on-asa/m-p/1296413#M802312 jeffland_98 2019-03-11T16:11:09Z Re: EIGRP on ASA https://community.cisco.com/t5/network-security/eigrp-on-asa/m-p/1296414#M802317 <HTML><HEAD></HEAD><BODY><P>Per-packet load balancing uses round-robin techniques to select the output path without basing the choice on the packet content.</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/pplb.html#wp1038067" target="_blank">http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/pplb.html#wp1038067</A></P></BODY></HTML> Fri, 04 Sep 2009 14:59:07 GMT https://community.cisco.com/t5/network-security/eigrp-on-asa/m-p/1296414#M802317 smalkeric 2009-09-04T14:59:07Z Re: EIGRP on ASA https://community.cisco.com/t5/network-security/eigrp-on-asa/m-p/1296415#M802320 <HTML><HEAD></HEAD><BODY><P>Yes, and it works great on a cisco router running v12. I'm trying to find the same command (or equivalent) on an ASA appliance running 8.0(3).</P></BODY></HTML> Sat, 05 Sep 2009 01:59:44 GMT https://community.cisco.com/t5/network-security/eigrp-on-asa/m-p/1296415#M802320 jeffland_98 2009-09-05T01:59:44Z