topic Re: IPS Tab in ASDM in Network Security https://community.cisco.com/t5/network-security/ips-tab-in-asdm/m-p/984884#M80267 <HTML><HEAD></HEAD><BODY><P>You may want to ensure that your Access List allows the IP address of the firewall to contact it.</P><P></P><P>*Addition* - You need to do this through your SSM configuration. You can EASILY do this by quickly running through your "setup" option and when it gets to "Modify Access-lists" Just say yes.. it will then ask what you want to permit, just punch in your firewall IP address. You can then hit enter till you get to the last stage and hit 2 to save the config and reload.</P></BODY></HTML> Fri, 18 Apr 2008 22:33:23 GMT chickman 2008-04-18T22:33:23Z IPS Tab in ASDM https://community.cisco.com/t5/network-security/ips-tab-in-asdm/m-p/984876#M80256 <P>Hy i have a ASA5520 whit the SSM_AIP10 Module installd.. I can not connect to the Module via ASDM (ther is a Tab IPS) can someone help me?</P><P></P><P>Thanks and salutation from switzerland..</P><P></P> Sun, 10 Mar 2019 11:04:22 GMT https://community.cisco.com/t5/network-security/ips-tab-in-asdm/m-p/984876#M80256 mirjam_ehb 2019-03-10T11:04:22Z Re: IPS Tab in ASDM https://community.cisco.com/t5/network-security/ips-tab-in-asdm/m-p/984877#M80258 <HTML><HEAD></HEAD><BODY><P>Make sure the ASA has access to the managment address on the IPS sensor. Also, add the ASA asa a host which is allowed to connect to the IPS in the IPS config.</P><P></P><P>service host</P><P>network-settings</P><P>access-list <FIREWALL.IP>/32</FIREWALL.IP></P></BODY></HTML> Fri, 18 Apr 2008 13:26:49 GMT https://community.cisco.com/t5/network-security/ips-tab-in-asdm/m-p/984877#M80258 acomiskey 2008-04-18T13:26:49Z Re: IPS Tab in ASDM https://community.cisco.com/t5/network-security/ips-tab-in-asdm/m-p/984878#M80259 <HTML><HEAD></HEAD><BODY><P>Thank you for the answer.. But the FW is alredy in the ACL...</P><P></P></BODY></HTML> Fri, 18 Apr 2008 13:33:11 GMT https://community.cisco.com/t5/network-security/ips-tab-in-asdm/m-p/984878#M80259 mirjam_ehb 2008-04-18T13:33:11Z Re: IPS Tab in ASDM https://community.cisco.com/t5/network-security/ips-tab-in-asdm/m-p/984879#M80260 <HTML><HEAD></HEAD><BODY><P>Can you ping the IPS from the ASA?</P></BODY></HTML> Fri, 18 Apr 2008 14:05:22 GMT https://community.cisco.com/t5/network-security/ips-tab-in-asdm/m-p/984879#M80260 acomiskey 2008-04-18T14:05:22Z Re: IPS Tab in ASDM https://community.cisco.com/t5/network-security/ips-tab-in-asdm/m-p/984880#M80261 <HTML><HEAD></HEAD><BODY><P>Yes i can ping the Module from ASA</P></BODY></HTML> Fri, 18 Apr 2008 14:15:35 GMT https://community.cisco.com/t5/network-security/ips-tab-in-asdm/m-p/984880#M80261 mirjam_ehb 2008-04-18T14:15:35Z Re: IPS Tab in ASDM https://community.cisco.com/t5/network-security/ips-tab-in-asdm/m-p/984881#M80263 <HTML><HEAD></HEAD><BODY><P>Does it prompt you for username/password?</P></BODY></HTML> Fri, 18 Apr 2008 14:29:20 GMT https://community.cisco.com/t5/network-security/ips-tab-in-asdm/m-p/984881#M80263 acomiskey 2008-04-18T14:29:20Z Re: IPS Tab in ASDM https://community.cisco.com/t5/network-security/ips-tab-in-asdm/m-p/984882#M80265 <HTML><HEAD></HEAD><BODY><P>no after i click on the IPS Tab it comes an error message:</P><P>Error connetcting to the sensor.Error Loading Sensor</P></BODY></HTML> Fri, 18 Apr 2008 14:31:50 GMT https://community.cisco.com/t5/network-security/ips-tab-in-asdm/m-p/984882#M80265 mirjam_ehb 2008-04-18T14:31:50Z Re: IPS Tab in ASDM https://community.cisco.com/t5/network-security/ips-tab-in-asdm/m-p/984883#M80266 <HTML><HEAD></HEAD><BODY><P>what version of ASA software and IPS software?</P><P></P><P>I had this problem when I was using ASA 7.1 and 7.2 with IPS 5.1(7). Old ASA with New IPS combination.</P></BODY></HTML> Fri, 18 Apr 2008 18:34:02 GMT https://community.cisco.com/t5/network-security/ips-tab-in-asdm/m-p/984883#M80266 scothrel 2008-04-18T18:34:02Z Re: IPS Tab in ASDM https://community.cisco.com/t5/network-security/ips-tab-in-asdm/m-p/984884#M80267 <HTML><HEAD></HEAD><BODY><P>You may want to ensure that your Access List allows the IP address of the firewall to contact it.</P><P></P><P>*Addition* - You need to do this through your SSM configuration. You can EASILY do this by quickly running through your "setup" option and when it gets to "Modify Access-lists" Just say yes.. it will then ask what you want to permit, just punch in your firewall IP address. You can then hit enter till you get to the last stage and hit 2 to save the config and reload.</P></BODY></HTML> Fri, 18 Apr 2008 22:33:23 GMT https://community.cisco.com/t5/network-security/ips-tab-in-asdm/m-p/984884#M80267 chickman 2008-04-18T22:33:23Z Re: IPS Tab in ASDM https://community.cisco.com/t5/network-security/ips-tab-in-asdm/m-p/984885#M80268 <HTML><HEAD></HEAD><BODY><P>no but the FW is in the ACL.. i can ping the Moduls from the FW.. i use Version 6.0 and ASA 7.2.(3)</P></BODY></HTML> Mon, 21 Apr 2008 05:24:48 GMT https://community.cisco.com/t5/network-security/ips-tab-in-asdm/m-p/984885#M80268 mirjam_ehb 2008-04-21T05:24:48Z