topic Multiple IPs for server in Network Security https://community.cisco.com/t5/network-security/multiple-ips-for-server/m-p/1312535#M812014 <P>I have a customer where i have a DMZ host which has 2 IPs, one internal IP (10.184.19.10) and one NAT IP (199.229.216.10). However, the internal users needs to be able to access this DMZ host via both IPs. This DMZ host and all the internal users are connected via different interfaces on the same Cisco ASA 5520.</P><P></P><P>How can this be done??</P><P></P><P>The Cisco ASA Firewall is using 8.0(4).</P> Mon, 11 Mar 2019 15:59:54 GMT huntlee 2019-03-11T15:59:54Z Multiple IPs for server https://community.cisco.com/t5/network-security/multiple-ips-for-server/m-p/1312535#M812014 <P>I have a customer where i have a DMZ host which has 2 IPs, one internal IP (10.184.19.10) and one NAT IP (199.229.216.10). However, the internal users needs to be able to access this DMZ host via both IPs. This DMZ host and all the internal users are connected via different interfaces on the same Cisco ASA 5520.</P><P></P><P>How can this be done??</P><P></P><P>The Cisco ASA Firewall is using 8.0(4).</P> Mon, 11 Mar 2019 15:59:54 GMT https://community.cisco.com/t5/network-security/multiple-ips-for-server/m-p/1312535#M812014 huntlee 2019-03-11T15:59:54Z Re: Multiple IPs for server https://community.cisco.com/t5/network-security/multiple-ips-for-server/m-p/1312536#M812020 <HTML><HEAD></HEAD><BODY><P>First you should disconnect the NIC that goes to the inside network on your DMZ server. This poses a large security issue because your by-passing your firewall. On the ASA you need to create ACE in your ACL to allow traffic to your DMZ server. You may need to configure NAT depending on your security interface levels.</P></BODY></HTML> Tue, 28 Jul 2009 15:21:53 GMT https://community.cisco.com/t5/network-security/multiple-ips-for-server/m-p/1312536#M812020 Collin Clark 2009-07-28T15:21:53Z