topic Re: Failover with ASA in transparent mode in Network Security https://community.cisco.com/t5/network-security/failover-with-asa-in-transparent-mode/m-p/1275921#M816890 <HTML><HEAD></HEAD><BODY><P>It's working for me. I did wait for sometime after enabling the failover stateful link. </P><P></P></BODY></HTML> Tue, 06 Oct 2009 03:55:45 GMT kicharle 2009-10-06T03:55:45Z Failover with ASA in transparent mode https://community.cisco.com/t5/network-security/failover-with-asa-in-transparent-mode/m-p/1275919#M816886 <P>Hi </P><P></P><P>With ASA failover in transparent mode, I don't see the mac-address-table replicated from the primary to secondary unit. </P><P></P><P>Any comments...</P><P></P><P>With regards</P><P>Kings</P> Mon, 11 Mar 2019 16:22:50 GMT https://community.cisco.com/t5/network-security/failover-with-asa-in-transparent-mode/m-p/1275919#M816886 kicharle 2019-03-11T16:22:50Z Re: Failover with ASA in transparent mode https://community.cisco.com/t5/network-security/failover-with-asa-in-transparent-mode/m-p/1275920#M816888 <HTML><HEAD></HEAD><BODY><P>Are you running stateful failover? Can you provide "show failover"?</P></BODY></HTML> Mon, 05 Oct 2009 20:56:24 GMT https://community.cisco.com/t5/network-security/failover-with-asa-in-transparent-mode/m-p/1275920#M816888 Yudong Wu 2009-10-05T20:56:24Z Re: Failover with ASA in transparent mode https://community.cisco.com/t5/network-security/failover-with-asa-in-transparent-mode/m-p/1275921#M816890 <HTML><HEAD></HEAD><BODY><P>It's working for me. I did wait for sometime after enabling the failover stateful link. </P><P></P></BODY></HTML> Tue, 06 Oct 2009 03:55:45 GMT https://community.cisco.com/t5/network-security/failover-with-asa-in-transparent-mode/m-p/1275921#M816890 kicharle 2009-10-06T03:55:45Z