topic Re: VPN connection in Network Security https://community.cisco.com/t5/network-security/vpn-connection/m-p/1271761#M825544 <HTML><HEAD></HEAD><BODY><P>You may have an access-group (show run access-group) applied on your inside interface that is not allowing telnet/rdp. Make sure the traffic is permitted if you have an acl applied with the access-group command.</P><P></P><P>Check the log on the ASA to see what it says when you try to open the telnet/rdp. You could also set up a wireshark capture on the internal PC. </P></BODY></HTML> Wed, 14 Oct 2009 17:16:44 GMT hdashnau 2009-10-14T17:16:44Z VPN connection https://community.cisco.com/t5/network-security/vpn-connection/m-p/1271760#M825542 <P>Dear All,</P><P>I have configured my ASA 5510 with remote VPN, I can connect from my PC to my Network through this VPN and I can ping any PC in the network BUT, I cannot telnet or open any PC in the network using Remote Desktop Connection. is these needs more configuration?</P><P>please help with details, Appreciated</P> Mon, 11 Mar 2019 16:22:37 GMT https://community.cisco.com/t5/network-security/vpn-connection/m-p/1271760#M825542 m.metwally 2019-03-11T16:22:37Z Re: VPN connection https://community.cisco.com/t5/network-security/vpn-connection/m-p/1271761#M825544 <HTML><HEAD></HEAD><BODY><P>You may have an access-group (show run access-group) applied on your inside interface that is not allowing telnet/rdp. Make sure the traffic is permitted if you have an acl applied with the access-group command.</P><P></P><P>Check the log on the ASA to see what it says when you try to open the telnet/rdp. You could also set up a wireshark capture on the internal PC. </P></BODY></HTML> Wed, 14 Oct 2009 17:16:44 GMT https://community.cisco.com/t5/network-security/vpn-connection/m-p/1271761#M825544 hdashnau 2009-10-14T17:16:44Z