ASA 5520 VPN Repoting using RADIUS

srlewis72 — Mon, 11 Mar 2019 16:06:26 GMT

I currently have an ASA 5520 that we use with a RADIUS server for VPN access. I was told that there is a way to configure the ASA so we can pull reports on VPN usage by the users that are in the RADIUS server. I have searched and searched and I cannot find anything that deals with pulling a report from the ASA on who is logged in and for how long. Is this even possible?

Re: ASA 5520 VPN Repoting using RADIUS

smalkeric — Thu, 20 Aug 2009 14:45:01 GMT

You can have report on VPN usage by configuring accounting feature in your ASA. Accounting tracks traffic that passes through the security appliance, enabling you to have a record of user activity. If you enable authentication for that traffic, you can account for traffic per user. If you do not authenticate the traffic, you can account for traffic per IP address. Accounting information includes when sessions start and stop, username, the number of bytes that pass through the security appliance for the session, the service used, and the duration of each session.

For configuring the accounting in ASA refer the below URL:

http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/access_fwaaa.html#wp1043741

topic Re: ASA 5520 VPN Repoting using RADIUS in Network Security

ASA 5520 VPN Repoting using RADIUS

Re: ASA 5520 VPN Repoting using RADIUS