topic Re: PIX LAN FAILOVER in Network Security https://community.cisco.com/t5/network-security/pix-lan-failover/m-p/1306793#M828264 <HTML><HEAD></HEAD><BODY><P>Both Devices should be in same version.</P><P>Otherwise it will not sync.</P><P></P><P>Thanks</P><P></P></BODY></HTML> Tue, 18 Aug 2009 14:02:18 GMT somsh 2009-08-18T14:02:18Z PIX LAN FAILOVER https://community.cisco.com/t5/network-security/pix-lan-failover/m-p/1306791#M828210 <P>Hi All, </P><P></P><P>I wanted just to check the impact of running 2 PIX 535 as Active/Standby with different Image 7.2.2 and 8.0.2</P><P>I am getting only this warning:</P><P></P><P>Any feedback is appreciated.</P><P></P><P>Jean </P><P></P><P>************WARNING****WARNING****WARNING********************************</P><P> Mate version 8.0(2) is not identical with ours 7.2(2)</P><P>************WARNING****WARNING****WARNING</P><P></P> Mon, 11 Mar 2019 16:06:13 GMT https://community.cisco.com/t5/network-security/pix-lan-failover/m-p/1306791#M828210 jeansamarani 2019-03-11T16:06:13Z Re: PIX LAN FAILOVER https://community.cisco.com/t5/network-security/pix-lan-failover/m-p/1306792#M828243 <HTML><HEAD></HEAD><BODY><P>Jean</P><P></P><P>It is my understanding that to run failover both PIX must be running the same version of code. I am not sure whether this is really a "warning" or whether it is really an "error". I suggest that you get both PIX on the same version of code before you run failover.</P><P></P><P>HTH</P><P></P><P>Rick</P></BODY></HTML> Fri, 14 Aug 2009 10:41:23 GMT https://community.cisco.com/t5/network-security/pix-lan-failover/m-p/1306792#M828243 Richard Burts 2009-08-14T10:41:23Z Re: PIX LAN FAILOVER https://community.cisco.com/t5/network-security/pix-lan-failover/m-p/1306793#M828264 <HTML><HEAD></HEAD><BODY><P>Both Devices should be in same version.</P><P>Otherwise it will not sync.</P><P></P><P>Thanks</P><P></P></BODY></HTML> Tue, 18 Aug 2009 14:02:18 GMT https://community.cisco.com/t5/network-security/pix-lan-failover/m-p/1306793#M828264 somsh 2009-08-18T14:02:18Z