topic IPS 4260 & CSM in Network Security https://community.cisco.com/t5/network-security/ips-4260-csm/m-p/838364#M84922 <P>I have 4260 IPS. I have heard that 5.x is not supported IEV. Only IDS with 4.x support IEV. Now 5.x require CSM for event viewing. I got the 2 CSM CDs in the 4260 box. I also have cisco works cds.</P><P></P><P>Can u please guide me will these are enough to install the CSM on Cisco Works.</P><P></P><P>Waiting for reply </P> Sun, 10 Mar 2019 10:56:28 GMT wasiimcisco 2019-03-10T10:56:28Z IPS 4260 & CSM https://community.cisco.com/t5/network-security/ips-4260-csm/m-p/838364#M84922 <P>I have 4260 IPS. I have heard that 5.x is not supported IEV. Only IDS with 4.x support IEV. Now 5.x require CSM for event viewing. I got the 2 CSM CDs in the 4260 box. I also have cisco works cds.</P><P></P><P>Can u please guide me will these are enough to install the CSM on Cisco Works.</P><P></P><P>Waiting for reply </P> Sun, 10 Mar 2019 10:56:28 GMT https://community.cisco.com/t5/network-security/ips-4260-csm/m-p/838364#M84922 wasiimcisco 2019-03-10T10:56:28Z Re: IPS 4260 & CSM https://community.cisco.com/t5/network-security/ips-4260-csm/m-p/838365#M84923 <HTML><HEAD></HEAD><BODY><P>Just so you are aware there is an IEV 5.2.</P><P></P><P>IEV 5.2 can receive events from 5.x sensors as well as 6.x sensors.</P><P>Though with 6.x sensors some of the fields in 6.x will not be seen in IEV 5.2.</P><P><A class="jive-link-custom" href="http://www.cisco.com/cgi-bin/tablebuild.pl/ips-ev" target="_blank">http://www.cisco.com/cgi-bin/tablebuild.pl/ips-ev</A></P><P></P><P>So you would only need CSM if you were wanting centralized configuration instead of per sensor configuration with IDM.</P><P></P></BODY></HTML> Mon, 14 Jan 2008 19:13:35 GMT https://community.cisco.com/t5/network-security/ips-4260-csm/m-p/838365#M84923 marcabal 2008-01-14T19:13:35Z