topic Re: Changing time on AIP SSM 10 module. in Network Security https://community.cisco.com/t5/network-security/changing-time-on-aip-ssm-10-module/m-p/838930#M85751 <HTML><HEAD></HEAD><BODY><P>AIP SSM can automatically synchronize its clock with the clock in the ASA in which it is installed. This is the default. The UTC time is synchronized between ASA and AIP SSM. The time zone and summertime settings are not synchronized between ASA and AIP SSM. You have to configure the time zone on the SSM because it is the UTC time that it gets from the ASA.</P></BODY></HTML> Mon, 17 Sep 2007 19:44:16 GMT tstanik 2007-09-17T19:44:16Z Changing time on AIP SSM 10 module. https://community.cisco.com/t5/network-security/changing-time-on-aip-ssm-10-module/m-p/838929#M85750 <P>How can i change the sensors time manually on my AIP-SSM-10 module installed in the ASA 5520 device .. ??</P><P></P><P>i tried the clock set command but apparently its not supported on AIP-SSM-10 module.</P><P></P><P>the ASA has the correnct time but the IPS does not... </P><P>any ideas ??</P><P></P><P>thanks.. </P><P></P><P>zaid</P> Sun, 10 Mar 2019 10:47:27 GMT https://community.cisco.com/t5/network-security/changing-time-on-aip-ssm-10-module/m-p/838929#M85750 zaidumer 2019-03-10T10:47:27Z Re: Changing time on AIP SSM 10 module. https://community.cisco.com/t5/network-security/changing-time-on-aip-ssm-10-module/m-p/838930#M85751 <HTML><HEAD></HEAD><BODY><P>AIP SSM can automatically synchronize its clock with the clock in the ASA in which it is installed. This is the default. The UTC time is synchronized between ASA and AIP SSM. The time zone and summertime settings are not synchronized between ASA and AIP SSM. You have to configure the time zone on the SSM because it is the UTC time that it gets from the ASA.</P></BODY></HTML> Mon, 17 Sep 2007 19:44:16 GMT https://community.cisco.com/t5/network-security/changing-time-on-aip-ssm-10-module/m-p/838930#M85751 tstanik 2007-09-17T19:44:16Z Re: Changing time on AIP SSM 10 module. https://community.cisco.com/t5/network-security/changing-time-on-aip-ssm-10-module/m-p/838931#M85752 <HTML><HEAD></HEAD><BODY><P>You can find the complete configuration guide for the AIP-SSM-10 in the URL posted below. The configuration of the time-settings is explained in the following chapter: 'Initial Tasks &gt; Configuring Time'.</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_configuration_guide_chapter09186a008055df9a.html#wp1035238" target="_blank">http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_configuration_guide_chapter09186a008055df9a.html#wp1035238</A></P><P></P><P>Please rate if the post is usefull!</P><P></P><P>Regards,</P><P></P><P>Michael</P><P></P><P></P></BODY></HTML> Thu, 20 Sep 2007 08:27:26 GMT https://community.cisco.com/t5/network-security/changing-time-on-aip-ssm-10-module/m-p/838931#M85752 mfreijser 2007-09-20T08:27:26Z