topic Re: multiple interface use same global ip in Network Security

multiple interface use same global ip

guoqiang.li — Mon, 11 Mar 2019 16:51:09 GMT

HI,ALL

my cus have strange require,multiple interface use same global ip,cfg is :

interface Ethernet0/2
nameif tuoguan_internet1
security-level 50
ip address 200.1.1.1 255.255.255.248
!

global (internet) 90 200.1.1.1
global (tuoguan_internet1) 90 interface
global (tuoguan_internet2) 90 200.1.1.1
nat (oa) 90 access-list oa_acl_in

it seems can work righ.

but if tuoguan_internet1 and tuoguan_internet2 are in same hub, the pc in hub have arp confusion.sometime can't comunication to another.

Re: multiple interface use same global ip

Kureli Sankar — Tue, 22 Dec 2009 04:03:54 GMT

Pls. replace the hub with a swtich and carve vlans for each of the interface in the firewall.

-KS

Re: multiple interface use same global ip

guoqiang.li — Tue, 22 Dec 2009 04:46:13 GMT

thks,KS quickly repply.

if replace the hub with a swtich and carve vlans for each of the interface in the firewall,the multiple interface use same global ip can work normal.

can you give me some cco link for this cfg. thks millions.

guoqiang

Re: multiple interface use same global ip

Kureli Sankar — Wed, 23 Dec 2009 01:11:31 GMT

Here is a good link that I found:

http://www.cisco.com/en/US/tech/tk389/tk689/technologies_configuration_example09186a008009478e.shtml

-KS

Re: multiple interface use same global ip

guoqiang.li — Wed, 23 Dec 2009 04:29:37 GMT

Hi,KS:

no the vlan cfg.I want to know if can find the sample or explain for the multiple interface use same global ip cfg .I can't find the the multiple interface use same global ip sample in cco.

thks millions

guoqiang

Re: multiple interface use same global ip

Kureli Sankar — Wed, 23 Dec 2009 13:09:02 GMT

Sorry I didn't understand the question correctly.

Say you have dmz1, dmz2, dmz3, inside and outside interfaces.

dmz1 - 10.10.10.0/24

dmz2 - 192.168.1.0/24

dmz3 - 172.16.1.0./24

inside - 192.168.2.0/24

outside - interface address

nat (inside) 1 192.168.2.0 255.255.255.0

nat (dmz1) 1 10.10.10.0 255.255.255.0

nat (dmz2) 1 192.168.1.0 255.255.255.0

nat (dmz3) 1 192.168.2.0 255.255.255.0

global (outside) 1 interface.

There you go. That is a sample. All the inside networks will be PAT-ed to the outside interface address.

You can use this link for reference:

http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/no.html#wp1737858

-KS