topic Re: source address from firewall in Network Security

source address from firewall

suthomas1 — Mon, 11 Mar 2019 15:57:39 GMT

Hi,

I have an ASA acting as vpn firewall with two interfaces- VPN_external & local.

once i vpn in and get my ip address from the vpn pool, if i am to telnet to another device in my network which is on a differenct ip segment,which interface from the VPN firewall would be acting as source for this telnet connection initiated?

Thanks.

Re: source address from firewall

Roman Rodichev — Wed, 22 Jul 2009 04:35:41 GMT

traffic would be coming from your VPN client's IP address

Re: source address from firewall

suthomas1 — Wed, 22 Jul 2009 14:10:56 GMT

Ok..But when i initiate a telnet connection while connected to this VPN pool, the flow would take which interface as source, external or internal; as if am correct the vpn pool is assigned by firewall itself & doesnt reside on any interface.

Reason for this query is that am unable to access some of the devices in the same segment via telnet from within this VPN, so i was wondering if i need to put an acl for them.

Thanks.

Re: source address from firewall

srue — Wed, 22 Jul 2009 16:45:35 GMT

is sysopt connection permit-ipsec enabled?

is split tunneling enabled?

Re: source address from firewall

suthomas1 — Wed, 22 Jul 2009 23:20:31 GMT

this one supports ssl vpn;

split tunneling is disabled.