topic Re: ASA rule configuring help in Network Security https://community.cisco.com/t5/network-security/asa-rule-configuring-help/m-p/1330142#M858705 <HTML><HEAD></HEAD><BODY><P>We also need the output of </P><P></P><P>sh run static | i 192.168.254.22</P><P></P><P>and </P><P></P><P>sh run access-group</P><P></P></BODY></HTML> Thu, 16 Jul 2009 01:47:50 GMT Kureli Sankar 2009-07-16T01:47:50Z ASA rule configuring help https://community.cisco.com/t5/network-security/asa-rule-configuring-help/m-p/1330141#M858694 <P>I need to configure the following rule and need help to configure a ACL:</P><P></P><P>Server (192.168.254.22)is in the DMZ</P><P></P><P>From server Port 1521 open only to users inside the xyz domain (not external</P><P>users)</P><P>From Server Port 80 open to any host (internal and external) And enable internet access from server</P><P></P><P>XYZ# sh ip address</P><P>System IP Addresses:</P><P>Interface Name IP address Subnet mask Method </P><P>Ethernet0/0 outside 195.8.188.82 255.255.255.240 CONFIG</P><P>Ethernet0/1 inside 150.200.200.61 255.255.0.0 CONFIG</P><P>Ethernet0/2 dmz 192.168.254.254 255.255.255.0 CONFIG</P> Mon, 11 Mar 2019 15:54:13 GMT https://community.cisco.com/t5/network-security/asa-rule-configuring-help/m-p/1330141#M858694 patel.nishit 2019-03-11T15:54:13Z Re: ASA rule configuring help https://community.cisco.com/t5/network-security/asa-rule-configuring-help/m-p/1330142#M858705 <HTML><HEAD></HEAD><BODY><P>We also need the output of </P><P></P><P>sh run static | i 192.168.254.22</P><P></P><P>and </P><P></P><P>sh run access-group</P><P></P></BODY></HTML> Thu, 16 Jul 2009 01:47:50 GMT https://community.cisco.com/t5/network-security/asa-rule-configuring-help/m-p/1330142#M858705 Kureli Sankar 2009-07-16T01:47:50Z