topic ASA failover through switch in Network Security https://community.cisco.com/t5/network-security/asa-failover-through-switch/m-p/1265685#M858999 <P>Can ASA's be configured in Active/Passive mode when the statelink goes through a switch?</P> Mon, 11 Mar 2019 15:49:49 GMT networker99 2019-03-11T15:49:49Z ASA failover through switch https://community.cisco.com/t5/network-security/asa-failover-through-switch/m-p/1265685#M858999 <P>Can ASA's be configured in Active/Passive mode when the statelink goes through a switch?</P> Mon, 11 Mar 2019 15:49:49 GMT https://community.cisco.com/t5/network-security/asa-failover-through-switch/m-p/1265685#M858999 networker99 2019-03-11T15:49:49Z Re: ASA failover through switch https://community.cisco.com/t5/network-security/asa-failover-through-switch/m-p/1265686#M859000 <HTML><HEAD></HEAD><BODY><P>Yes -- this is called LAN-based failover. The only requirement on the switches is that you should configure the link to be on a dedicated VLAN between the two ASA's.</P><P></P><P>See here for configuration examples:</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807dac5f.shtml#lanbas" target="_blank">http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807dac5f.shtml#lanbas</A></P><P></P><P>HTH,</P><P></P><P>Brandon</P></BODY></HTML> Wed, 01 Jul 2009 14:36:21 GMT https://community.cisco.com/t5/network-security/asa-failover-through-switch/m-p/1265686#M859000 branfarm1 2009-07-01T14:36:21Z