topic Re: filover login in Network Security https://community.cisco.com/t5/network-security/filover-login/m-p/1147697#M859697 <HTML><HEAD></HEAD><BODY><P>sh failover will tell you which is active and standby and their ip aswell</P></BODY></HTML> Mon, 25 May 2009 12:12:22 GMT sonyscaria 2009-05-25T12:12:22Z filover login https://community.cisco.com/t5/network-security/filover-login/m-p/1147694#M859684 <P>hi,</P><P></P><P>i have two ASA5540 in that i want to login in my 2nd firewall. how i login in my 2nd firewall.</P><P></P><P>my failover is active/standby mode.</P><P></P><P>is there any way to login in with telnet.</P> Mon, 11 Mar 2019 15:36:18 GMT https://community.cisco.com/t5/network-security/filover-login/m-p/1147694#M859684 mitang.prajapati 2019-03-11T15:36:18Z Re: filover login https://community.cisco.com/t5/network-security/filover-login/m-p/1147695#M859689 <HTML><HEAD></HEAD><BODY><P>There should be no problem with logging into the secondary with "telnet ip.secondary.ip.address".</P><P></P><P>The only problems that I have had with it relates to the fact that Dynamic routes are not transfered to the secondary so if you reply on dynamic routing we may have issues with it. The pix might not know how to get back to your workstation or how to get to external authentication servers.</P></BODY></HTML> Mon, 25 May 2009 11:01:05 GMT https://community.cisco.com/t5/network-security/filover-login/m-p/1147695#M859689 mmacdonald70 2009-05-25T11:01:05Z Re: filover login https://community.cisco.com/t5/network-security/filover-login/m-p/1147696#M859692 <HTML><HEAD></HEAD><BODY><P>in active/state_full failover. if i shutdown one asa then second one gone to active ok. now what i give ip add to login into second firewall while my 1st one is running. </P></BODY></HTML> Mon, 25 May 2009 11:47:09 GMT https://community.cisco.com/t5/network-security/filover-login/m-p/1147696#M859692 mitang.prajapati 2009-05-25T11:47:09Z Re: filover login https://community.cisco.com/t5/network-security/filover-login/m-p/1147697#M859697 <HTML><HEAD></HEAD><BODY><P>sh failover will tell you which is active and standby and their ip aswell</P></BODY></HTML> Mon, 25 May 2009 12:12:22 GMT https://community.cisco.com/t5/network-security/filover-login/m-p/1147697#M859697 sonyscaria 2009-05-25T12:12:22Z Re: filover login https://community.cisco.com/t5/network-security/filover-login/m-p/1147698#M859700 <HTML><HEAD></HEAD><BODY><P>yes you r say right.</P><P></P><P>but i want to know how to login in standby firewall.</P><P></P><P></P></BODY></HTML> Mon, 25 May 2009 12:52:42 GMT https://community.cisco.com/t5/network-security/filover-login/m-p/1147698#M859700 mitang.prajapati 2009-05-25T12:52:42Z Re: filover login https://community.cisco.com/t5/network-security/filover-login/m-p/1147699#M859704 <HTML><HEAD></HEAD><BODY><P>If you have config the outside interface with ip address for the standby firewall. </P><P></P><P>Config SSH and try to ssh you should able to log in to the secondary firewall.</P><P></P><P>Hope this helps</P></BODY></HTML> Mon, 25 May 2009 13:09:39 GMT https://community.cisco.com/t5/network-security/filover-login/m-p/1147699#M859704 Pravin Phadte 2009-05-25T13:09:39Z Re: filover login https://community.cisco.com/t5/network-security/filover-login/m-p/1147700#M859706 <HTML><HEAD></HEAD><BODY><P>no my management port work as a failover link.</P><P></P><P></P></BODY></HTML> Mon, 25 May 2009 13:38:14 GMT https://community.cisco.com/t5/network-security/filover-login/m-p/1147700#M859706 mitang.prajapati 2009-05-25T13:38:14Z