topic IPS and Switch problem in Network Security https://community.cisco.com/t5/network-security/ips-and-switch-problem/m-p/789362#M85970 <P>Dears,</P><P>i need to use commands:</P><P></P><P>monitor session 1 source interface Fa0/1 - 23 </P><P>and</P><P>monitor session 1 destination interface Fa0/24</P><P>but when i put the second command i lost the connection with IPS sensor......what is the problem?</P><P></P><P>thank you.</P> Sun, 10 Mar 2019 10:44:59 GMT tareqrebhi 2019-03-10T10:44:59Z IPS and Switch problem https://community.cisco.com/t5/network-security/ips-and-switch-problem/m-p/789362#M85970 <P>Dears,</P><P>i need to use commands:</P><P></P><P>monitor session 1 source interface Fa0/1 - 23 </P><P>and</P><P>monitor session 1 destination interface Fa0/24</P><P>but when i put the second command i lost the connection with IPS sensor......what is the problem?</P><P></P><P>thank you.</P> Sun, 10 Mar 2019 10:44:59 GMT https://community.cisco.com/t5/network-security/ips-and-switch-problem/m-p/789362#M85970 tareqrebhi 2019-03-10T10:44:59Z Re: IPS and Switch problem https://community.cisco.com/t5/network-security/ips-and-switch-problem/m-p/789363#M85973 <HTML><HEAD></HEAD><BODY><P>By making your port a SPAN port to in essence mirror all traffic to the destination port from your source port(s). You cannot interact on the destination port. I mean that the destination port does not function as an access port anymore until you remove the SPAN from it. You need to find an alternate path to your IPS. Either from the outside or console....</P></BODY></HTML> Thu, 16 Aug 2007 11:14:52 GMT https://community.cisco.com/t5/network-security/ips-and-switch-problem/m-p/789363#M85973 pciaccio 2007-08-16T11:14:52Z