https://community.cisco.com/t5/network-security/asa-dmz-server/m-p/1176515#M859925 <HTML><HEAD></HEAD><BODY><P>Can you post your config?</P><P></P><P>HTH,</P><P>John</P></BODY></HTML> Tue, 12 May 2009 12:54:10 GMT John Blakley 2009-05-12T12:54:10Z https://community.cisco.com/t5/network-security/asa-dmz-server/m-p/1176514#M859924 <P>Hi,</P><P></P><P>I have a mail server in DMZ,and NATTING is done for public IP and a port 25.</P><P></P><P>Now from outside when I telnet to that server NATTED IP with the port,I am getting the blank screen,that means connectivity has been established,but I am not getting the Banner Screen,where as from Inside to the same server which is in DMZ,if I telnet to that private IP with the port 25 ,then I am getting the banner.</P><P></P><P>How to get the banner from outside by telnetting to that natted IP with port IP.</P><P></P><P>Please help me to resolve this issue.</P><P></P><P>Regards,</P><P></P><P>Newzion123</P> Mon, 11 Mar 2019 15:30:32 GMT https://community.cisco.com/t5/network-security/asa-dmz-server/m-p/1176514#M859924 newzion123 2019-03-11T15:30:32Z https://community.cisco.com/t5/network-security/asa-dmz-server/m-p/1176515#M859925 <HTML><HEAD></HEAD><BODY><P>Can you post your config?</P><P></P><P>HTH,</P><P>John</P></BODY></HTML> Tue, 12 May 2009 12:54:10 GMT https://community.cisco.com/t5/network-security/asa-dmz-server/m-p/1176515#M859925 John Blakley 2009-05-12T12:54:10Z