topic Re: Duplicate outside circuit for redundancy on ASA in Network Security https://community.cisco.com/t5/network-security/duplicate-outside-circuit-for-redundancy-on-asa/m-p/1151643#M860096 <HTML><HEAD></HEAD><BODY><P>v.v.very nice - 5 for you.</P></BODY></HTML> Thu, 07 May 2009 13:50:06 GMT andrew.prince 2009-05-07T13:50:06Z Duplicate outside circuit for redundancy on ASA https://community.cisco.com/t5/network-security/duplicate-outside-circuit-for-redundancy-on-asa/m-p/1151640#M860088 <P>We have an ASA running ver 8.0(4) and telco is proposing a scheme were two identically configured circuits would be handed to me. They would be active/passive in that both would be live but the second won't pass traffic unless the active circuit fails. How can I configure the ASA to support two connections that are Identically configured. Same VPNs, same address translations, same next hop, etc... </P> Mon, 11 Mar 2019 15:28:29 GMT https://community.cisco.com/t5/network-security/duplicate-outside-circuit-for-redundancy-on-asa/m-p/1151640#M860088 BILL BARTLETT 2019-03-11T15:28:29Z Re: Duplicate outside circuit for redundancy on ASA https://community.cisco.com/t5/network-security/duplicate-outside-circuit-for-redundancy-on-asa/m-p/1151641#M860090 <HTML><HEAD></HEAD><BODY><P>You need failover - see the below:-</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807dac5f.shtml" target="_blank">http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807dac5f.shtml</A></P><P></P><P>HTH&gt;</P></BODY></HTML> Thu, 07 May 2009 13:38:29 GMT https://community.cisco.com/t5/network-security/duplicate-outside-circuit-for-redundancy-on-asa/m-p/1151641#M860090 andrew.prince 2009-05-07T13:38:29Z Re: Duplicate outside circuit for redundancy on ASA https://community.cisco.com/t5/network-security/duplicate-outside-circuit-for-redundancy-on-asa/m-p/1151642#M860092 <HTML><HEAD></HEAD><BODY><P>What about a redundant pair?</P><P></P><P>ASA(config)# interface redundant 1</P><P>ASA(config-if)# member-interface gigabitethernet 0/0</P><P>ASA(config-if)# member-interface gigabitethernet 0/1</P></BODY></HTML> Thu, 07 May 2009 13:47:10 GMT https://community.cisco.com/t5/network-security/duplicate-outside-circuit-for-redundancy-on-asa/m-p/1151642#M860092 acomiskey 2009-05-07T13:47:10Z Re: Duplicate outside circuit for redundancy on ASA https://community.cisco.com/t5/network-security/duplicate-outside-circuit-for-redundancy-on-asa/m-p/1151643#M860096 <HTML><HEAD></HEAD><BODY><P>v.v.very nice - 5 for you.</P></BODY></HTML> Thu, 07 May 2009 13:50:06 GMT https://community.cisco.com/t5/network-security/duplicate-outside-circuit-for-redundancy-on-asa/m-p/1151643#M860096 andrew.prince 2009-05-07T13:50:06Z Re: Duplicate outside circuit for redundancy on ASA https://community.cisco.com/t5/network-security/duplicate-outside-circuit-for-redundancy-on-asa/m-p/1151644#M860098 <HTML><HEAD></HEAD><BODY><P>Thanks - That was just what I needed</P></BODY></HTML> Wed, 13 May 2009 13:58:50 GMT https://community.cisco.com/t5/network-security/duplicate-outside-circuit-for-redundancy-on-asa/m-p/1151644#M860098 BILL BARTLETT 2009-05-13T13:58:50Z