topic Re: ASA failover when AIP-SSM-10 analysis engine stops? in Network Security https://community.cisco.com/t5/network-security/asa-failover-when-aip-ssm-10-analysis-engine-stops/m-p/732067#M86835 <HTML><HEAD></HEAD><BODY><P>I do not think it is possible, because from ASA's point of view SSM is seen as an external device so when the analysis engine fails the ASA will not failover to the backup.</P></BODY></HTML> Mon, 07 May 2007 18:15:38 GMT carenas123 2007-05-07T18:15:38Z ASA failover when AIP-SSM-10 analysis engine stops? https://community.cisco.com/t5/network-security/asa-failover-when-aip-ssm-10-analysis-engine-stops/m-p/732066#M86834 <P>All I am able to find when researching a stoppage of the analysis engine on an AIP-SSM-10 are the off/on/auto settings. My goal is to keep all traffic inspected all the time. Is there a setting to have the whole ASA failover to its backup when the IPSM module analysis engine stops?</P> Sun, 10 Mar 2019 10:35:32 GMT https://community.cisco.com/t5/network-security/asa-failover-when-aip-ssm-10-analysis-engine-stops/m-p/732066#M86834 dallace.butler 2019-03-10T10:35:32Z Re: ASA failover when AIP-SSM-10 analysis engine stops? https://community.cisco.com/t5/network-security/asa-failover-when-aip-ssm-10-analysis-engine-stops/m-p/732067#M86835 <HTML><HEAD></HEAD><BODY><P>I do not think it is possible, because from ASA's point of view SSM is seen as an external device so when the analysis engine fails the ASA will not failover to the backup.</P></BODY></HTML> Mon, 07 May 2007 18:15:38 GMT https://community.cisco.com/t5/network-security/asa-failover-when-aip-ssm-10-analysis-engine-stops/m-p/732067#M86835 carenas123 2007-05-07T18:15:38Z