topic Understanding ASA AIP-10 Module in Network Security

Understanding ASA AIP-10 Module

remco.gussen — Tue, 26 Mar 2019 00:18:20 GMT

Hi There

I've got some questions about the ASA AIP Module:

- Is the traffic travelling through the AIP Ethernet port to the ASA, or is it an internal circuit ?

- Can you check the AIP module if it is operating ok ?

- Is there a step-by-step manual to set up basic functions of the AIP module ?

Thank you for the answers.

Remco

Re: Understanding ASA AIP-10 Module

owillins — Mon, 09 Apr 2007 12:44:20 GMT

I think that traffic travels through the AIP ethernet port to the ASA. For chacking of the AIP module Cisco works can be used or you can use link https:// to monitor the AIP.

Following links may help you

Managing the AIP SSM and CSC SSM:

http://www.cisco.com/univercd/cc/td/doc/product/multisec/asa_sw/v_7_1/conf_gd/ssm.htm

Configuring the Cisco Intrusion Prevention System Sensor Using the Command Line Interface 5.1:

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/csids12/cliguide/index.htm

Installing AIP-SSM:

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/csids12/hwguide/hwssm.htm

Installing and Using Cisco Intrusion Prevention System Device Manager 5.1:

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/csids12/idmguide/index.htm

Re: Understanding ASA AIP-10 Module

remco.gussen — Tue, 10 Apr 2007 12:26:11 GMT

Thanks for that

Do i need to configure a virtual sensor too ?

Gr.

Remco