topic Re: Failover Methods? in Network Security https://community.cisco.com/t5/network-security/failover-methods/m-p/718720#M87176 <HTML><HEAD></HEAD><BODY><P>Enable logging on the firewall device. </P><P></P><P>Before a firewall device can generate syslog messages, you must enable logging for one or more interfaces. In addition, if you configured your firewall device in a failover pair, you can specify the standby firewall device to generate syslog messages as well. You can enable the device to ensure that the standby unit's syslog messages stay synchronized if failover occurs. However, this option results in twice as much traffic on the MARS Appliance. </P><P></P></BODY></HTML> Fri, 30 Mar 2007 13:51:08 GMT dsweeny 2007-03-30T13:51:08Z Failover Methods? https://community.cisco.com/t5/network-security/failover-methods/m-p/718719#M87175 <P>Hi all,</P><P>How do folks handle failover for say a MARS box? Will future models address this issue, or does Cisco see this as a non-issue for a MARS?</P><P></P><P>Thanks,</P><P>Bob</P> Sun, 10 Mar 2019 10:31:51 GMT https://community.cisco.com/t5/network-security/failover-methods/m-p/718719#M87175 laamidd2003 2019-03-10T10:31:51Z Re: Failover Methods? https://community.cisco.com/t5/network-security/failover-methods/m-p/718720#M87176 <HTML><HEAD></HEAD><BODY><P>Enable logging on the firewall device. </P><P></P><P>Before a firewall device can generate syslog messages, you must enable logging for one or more interfaces. In addition, if you configured your firewall device in a failover pair, you can specify the standby firewall device to generate syslog messages as well. You can enable the device to ensure that the standby unit's syslog messages stay synchronized if failover occurs. However, this option results in twice as much traffic on the MARS Appliance. </P><P></P></BODY></HTML> Fri, 30 Mar 2007 13:51:08 GMT https://community.cisco.com/t5/network-security/failover-methods/m-p/718720#M87176 dsweeny 2007-03-30T13:51:08Z