https://community.cisco.com/t5/network-security/asa-disk0-disk1/m-p/1183555#M874624 <P>I have copied all files from Disk0: to Disk1 in an ASA5520, my interntion being to configure the device to boot from Disk1 and the upgrade the image from 7.2 to 8.03 and asdm from 5.2 to 6.1.</P><P>When I look at the contents of the disks from ASDM file management - ASDM-522 on Disk0: has a status of ASDM image. on Disk1: the image is there but the status is blank - would this affect the asdm ability to run when I boot from Disk1 ?</P><P></P><P>many thanks</P><P>Keith</P><P></P> Mon, 11 Mar 2019 15:09:46 GMT KeithN123 2019-03-11T15:09:46Z https://community.cisco.com/t5/network-security/asa-disk0-disk1/m-p/1183555#M874624 <P>I have copied all files from Disk0: to Disk1 in an ASA5520, my interntion being to configure the device to boot from Disk1 and the upgrade the image from 7.2 to 8.03 and asdm from 5.2 to 6.1.</P><P>When I look at the contents of the disks from ASDM file management - ASDM-522 on Disk0: has a status of ASDM image. on Disk1: the image is there but the status is blank - would this affect the asdm ability to run when I boot from Disk1 ?</P><P></P><P>many thanks</P><P>Keith</P><P></P> Mon, 11 Mar 2019 15:09:46 GMT https://community.cisco.com/t5/network-security/asa-disk0-disk1/m-p/1183555#M874624 KeithN123 2019-03-11T15:09:46Z