topic Re: Inline VLAN pair and Monitoring mode in Network Security https://community.cisco.com/t5/network-security/inline-vlan-pair-and-monitoring-mode/m-p/609000#M87483 <HTML><HEAD></HEAD><BODY><P>thank you.</P><P></P><P>this is very helpful.</P><P></P><P>emoises</P></BODY></HTML> Mon, 19 Feb 2007 06:30:26 GMT emoises 2007-02-19T06:30:26Z Inline VLAN pair and Monitoring mode https://community.cisco.com/t5/network-security/inline-vlan-pair-and-monitoring-mode/m-p/608996#M87474 <P>Can I configure both Inline VLAN pair mode and Monitoring mode in Cisco IDSM2 with ver 6.0? </P><P></P><P>thanks in advance.</P> Sun, 10 Mar 2019 10:28:31 GMT https://community.cisco.com/t5/network-security/inline-vlan-pair-and-monitoring-mode/m-p/608996#M87474 emoises 2019-03-10T10:28:31Z Re: Inline VLAN pair and Monitoring mode https://community.cisco.com/t5/network-security/inline-vlan-pair-and-monitoring-mode/m-p/608997#M87477 <HTML><HEAD></HEAD><BODY><P>Yes,</P><P></P><P>You can use one of the dataport to be used for VLAN Pair mode and the other one for promiscuous mode.</P><P></P><P>Thank you.</P><P></P><P></P><P>Edward</P></BODY></HTML> Mon, 19 Feb 2007 05:11:48 GMT https://community.cisco.com/t5/network-security/inline-vlan-pair-and-monitoring-mode/m-p/608997#M87477 edwakim 2007-02-19T05:11:48Z Re: Inline VLAN pair and Monitoring mode https://community.cisco.com/t5/network-security/inline-vlan-pair-and-monitoring-mode/m-p/608998#M87480 <HTML><HEAD></HEAD><BODY><P>thank you.</P><P></P><P>so i will just configure the inline vlan pair as i am configuring a inline mode? </P><P></P><P>thanks.</P><P></P><P>emoises</P></BODY></HTML> Mon, 19 Feb 2007 06:00:02 GMT https://community.cisco.com/t5/network-security/inline-vlan-pair-and-monitoring-mode/m-p/608998#M87480 emoises 2007-02-19T06:00:02Z Re: Inline VLAN pair and Monitoring mode https://community.cisco.com/t5/network-security/inline-vlan-pair-and-monitoring-mode/m-p/608999#M87482 <HTML><HEAD></HEAD><BODY><P>Yes,</P><P></P><P>You will configure an inline pair for one dataport and you can use the other dataport to send either SPAN or VACL traffic.</P><P></P><P></P><P>Thank you.</P><P></P><P></P><P>Edward</P></BODY></HTML> Mon, 19 Feb 2007 06:15:51 GMT https://community.cisco.com/t5/network-security/inline-vlan-pair-and-monitoring-mode/m-p/608999#M87482 edwakim 2007-02-19T06:15:51Z Re: Inline VLAN pair and Monitoring mode https://community.cisco.com/t5/network-security/inline-vlan-pair-and-monitoring-mode/m-p/609000#M87483 <HTML><HEAD></HEAD><BODY><P>thank you.</P><P></P><P>this is very helpful.</P><P></P><P>emoises</P></BODY></HTML> Mon, 19 Feb 2007 06:30:26 GMT https://community.cisco.com/t5/network-security/inline-vlan-pair-and-monitoring-mode/m-p/609000#M87483 emoises 2007-02-19T06:30:26Z