topic Re: ASA 5540 in Network Security https://community.cisco.com/t5/network-security/asa-5540/m-p/1215840#M875038 <HTML><HEAD></HEAD><BODY><P>You may try configuring QoS on the firewall. The primary goal of QoS in the security appliance is to provide rate limiting on selected network traffic for both individual flow or VPN tunnel flow to ensue that all traffic gets its fair share of limited bandwidth. A flow can be defined in a number of ways. In the security appliance, QoS can apply to a combination of source and destination IP addresses, source and destination port number, and the Type of Service (ToS) byte of the IP header. </P><P></P></BODY></HTML> Thu, 19 Mar 2009 22:25:11 GMT smalkeric 2009-03-19T22:25:11Z ASA 5540 https://community.cisco.com/t5/network-security/asa-5540/m-p/1215839#M875035 <P>i have ASA 5540 firewall and i have 20 mb speed i want to distribut speed by ip and make it limted to download and upload can i do this by my firewall</P> Mon, 11 Mar 2019 15:04:51 GMT https://community.cisco.com/t5/network-security/asa-5540/m-p/1215839#M875035 ashrafciscoas 2019-03-11T15:04:51Z Re: ASA 5540 https://community.cisco.com/t5/network-security/asa-5540/m-p/1215840#M875038 <HTML><HEAD></HEAD><BODY><P>You may try configuring QoS on the firewall. The primary goal of QoS in the security appliance is to provide rate limiting on selected network traffic for both individual flow or VPN tunnel flow to ensue that all traffic gets its fair share of limited bandwidth. A flow can be defined in a number of ways. In the security appliance, QoS can apply to a combination of source and destination IP addresses, source and destination port number, and the Type of Service (ToS) byte of the IP header. </P><P></P></BODY></HTML> Thu, 19 Mar 2009 22:25:11 GMT https://community.cisco.com/t5/network-security/asa-5540/m-p/1215840#M875038 smalkeric 2009-03-19T22:25:11Z