topic Re: bidirectional Nat in Network Security https://community.cisco.com/t5/network-security/bidirectional-nat/m-p/1170674#M875255 <HTML><HEAD></HEAD><BODY><P>Have you checked the command reference guide?</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/no.html#wp1737858" target="_blank">http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/no.html#wp1737858</A></P><P></P><P>I don't think your two options are the same.</P><P></P><P></P></BODY></HTML> Mon, 09 Mar 2009 16:02:34 GMT lm20ele 2009-03-09T16:02:34Z bidirectional Nat https://community.cisco.com/t5/network-security/bidirectional-nat/m-p/1170673#M875254 <P>Hi </P><P>made</P><P>static (inside,outside) 172.16.12.2 192.168.9.11</P><P>static (outside,inside) 192.168.200.10 10.10.10.1</P><P></P><P>or</P><P></P><P>static (inside,outside) 172.16.12.2</P><P>192.168.9.11</P><P></P><P>nat (outside) 2 10.10.10.1 outside</P><P>global (inside) 2 192.168.200.10</P><P></P><P>is ti the same ?</P><P>Does anybody advice me about document</P><P>on bidirectional Nat ?</P><P></P><P>best regards</P><P></P><P>Lorenzo</P><P></P> Mon, 11 Mar 2019 15:02:10 GMT https://community.cisco.com/t5/network-security/bidirectional-nat/m-p/1170673#M875254 lformelli 2019-03-11T15:02:10Z Re: bidirectional Nat https://community.cisco.com/t5/network-security/bidirectional-nat/m-p/1170674#M875255 <HTML><HEAD></HEAD><BODY><P>Have you checked the command reference guide?</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/no.html#wp1737858" target="_blank">http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/no.html#wp1737858</A></P><P></P><P>I don't think your two options are the same.</P><P></P><P></P></BODY></HTML> Mon, 09 Mar 2009 16:02:34 GMT https://community.cisco.com/t5/network-security/bidirectional-nat/m-p/1170674#M875255 lm20ele 2009-03-09T16:02:34Z Re: bidirectional Nat https://community.cisco.com/t5/network-security/bidirectional-nat/m-p/1170675#M875256 <HTML><HEAD></HEAD><BODY><P>Hi</P><P></P><P>(inside,outside) will do source address NAT translation.</P><P>(outside,inside) will do destination based address translation.</P><P></P><P>Using the nat and global combination will only do source address translation</P></BODY></HTML> Mon, 09 Mar 2009 16:08:55 GMT https://community.cisco.com/t5/network-security/bidirectional-nat/m-p/1170675#M875256 adamclarkuk_2 2009-03-09T16:08:55Z