topic Re: static nat in Network Security https://community.cisco.com/t5/network-security/static-nat/m-p/1166184#M875306 <HTML><HEAD></HEAD><BODY><P>The command will configure a static NAT entry which map the internal/local IP 10.x.x.229 to external/global IP 63.x.x.229. If this is what you wnats, the answer is "yes". You also need configure "ip nat outside" and "ip nat inside" under related interface.</P></BODY></HTML> Sun, 08 Mar 2009 05:08:53 GMT Yudong Wu 2009-03-08T05:08:53Z static nat https://community.cisco.com/t5/network-security/static-nat/m-p/1166183#M875305 <P>A customer has two sites connected via a metro-e link. They are requesting that a video conference unit at the remote site utilize a public ip address. The video traffic comes into the main site and then crosses the metro-e to the video unit. Will the following command take care of it. </P><P>ip nat inside source static 10.x.x.229 63.x.x.229</P><P></P><P>Thank you in advance!</P> Mon, 11 Mar 2019 15:01:45 GMT https://community.cisco.com/t5/network-security/static-nat/m-p/1166183#M875305 Charles Hill 2019-03-11T15:01:45Z Re: static nat https://community.cisco.com/t5/network-security/static-nat/m-p/1166184#M875306 <HTML><HEAD></HEAD><BODY><P>The command will configure a static NAT entry which map the internal/local IP 10.x.x.229 to external/global IP 63.x.x.229. If this is what you wnats, the answer is "yes". You also need configure "ip nat outside" and "ip nat inside" under related interface.</P></BODY></HTML> Sun, 08 Mar 2009 05:08:53 GMT https://community.cisco.com/t5/network-security/static-nat/m-p/1166184#M875306 Yudong Wu 2009-03-08T05:08:53Z