topic PIX 525 write standby issue in Network Security https://community.cisco.com/t5/network-security/pix-525-write-standby-issue/m-p/1167580#M875958 <P>Hi </P><P></P><P>When I execute write standby command from primary PIX it is not copying one particular command line to the standby secondary PIX the command is "nat (inside) 0 access-list inside_nat0_acl"</P><P>even after rebooting secondary PIX I am having this issue. Other than that it is copying rest of the recent config changes.</P><P></P><P>Can anyone help me out how to fix this problem. Is it a known bug. If so , can I execute this command to the secondary PIX directly.</P><P></P><P>My IOS version is</P><P>Cisco PIX Security Appliance Software Version 7.2(1)</P><P></P><P>Cheers,</P><P>Siva</P><P></P> Mon, 11 Mar 2019 14:54:53 GMT sivakumar.ks 2019-03-11T14:54:53Z PIX 525 write standby issue https://community.cisco.com/t5/network-security/pix-525-write-standby-issue/m-p/1167580#M875958 <P>Hi </P><P></P><P>When I execute write standby command from primary PIX it is not copying one particular command line to the standby secondary PIX the command is "nat (inside) 0 access-list inside_nat0_acl"</P><P>even after rebooting secondary PIX I am having this issue. Other than that it is copying rest of the recent config changes.</P><P></P><P>Can anyone help me out how to fix this problem. Is it a known bug. If so , can I execute this command to the secondary PIX directly.</P><P></P><P>My IOS version is</P><P>Cisco PIX Security Appliance Software Version 7.2(1)</P><P></P><P>Cheers,</P><P>Siva</P><P></P> Mon, 11 Mar 2019 14:54:53 GMT https://community.cisco.com/t5/network-security/pix-525-write-standby-issue/m-p/1167580#M875958 sivakumar.ks 2019-03-11T14:54:53Z Re: PIX 525 write standby issue https://community.cisco.com/t5/network-security/pix-525-write-standby-issue/m-p/1167581#M875960 <HTML><HEAD></HEAD><BODY><P>Is the forum dead. </P></BODY></HTML> Tue, 24 Feb 2009 03:20:12 GMT https://community.cisco.com/t5/network-security/pix-525-write-standby-issue/m-p/1167581#M875960 sivakumar.ks 2009-02-24T03:20:12Z Re: PIX 525 write standby issue https://community.cisco.com/t5/network-security/pix-525-write-standby-issue/m-p/1167582#M875961 <HTML><HEAD></HEAD><BODY><P>Hey maybe..</P><P></P><P>Well, can you please post sh failover output? You might have some other issues.</P><P></P><P>Thanks</P></BODY></HTML> Tue, 24 Feb 2009 04:11:37 GMT https://community.cisco.com/t5/network-security/pix-525-write-standby-issue/m-p/1167582#M875961 stanleyb 2009-02-24T04:11:37Z Re: PIX 525 write standby issue https://community.cisco.com/t5/network-security/pix-525-write-standby-issue/m-p/1167583#M875962 <HTML><HEAD></HEAD><BODY><P>Here is the show failover output...</P><P>svhm-pix# sh failover</P><P>Failover On</P><P>Cable status: Normal</P><P>Failover unit Secondary</P><P>Failover LAN Interface: N/A - Serial-based failover enabled</P><P>Unit Poll frequency 6 seconds, holdtime 18 seconds</P><P>Interface Poll frequency 5 seconds, holdtime 25 seconds</P><P>Interface Policy 1</P><P>Monitored Interfaces 9 of 250 maximum</P><P>failover replication http</P><P>Version: Ours 7.2(1), Mate 7.2(1)</P><P>Last Failover at: 09:12:50 AEST Feb 22 2009</P><P> This host: Secondary - Active</P><P> Active time: 45544392 (sec)</P><P> Interface outside (0.0.0.0): Normal</P><P> Interface inside (0.0.0.0): Normal</P><P> Interface dmz-svhm (0.0.0.0): Link Down (Waiting)</P><P> Interface dmz-remote (0.0.0.0): Normal (Waiting)</P><P> Interface dmz-vpn-internal (0.0.0.0): Link Down (Waiting)</P><P> Interface dmz-vpn-external (0.0.0.0): Normal</P><P> Interface dmz-unimelb (0.0.0.0): Normal</P><P> Interface HealthSmart (0.0.0.0): Normal (Waiting)</P><P> Interface RVEEH-Network (0.0.0.0): Normal</P><P> Other host: Primary - Standby Ready</P><P> Active time: 426 (sec)</P><P> Interface outside (0.0.0.0): Normal</P><P> Interface inside (0.0.0.0): Normal</P><P> Interface dmz-svhm (0.0.0.0): Link Down (Waiting)</P><P> Interface dmz-remote (0.0.0.0): Normal (Waiting)</P><P> Interface dmz-vpn-internal (0.0.0.0): Link Down (Waiting)</P><P> Interface dmz-vpn-external (0.0.0.0): Normal</P><P> Interface dmz-unimelb (0.0.0.0): Normal</P><P> Interface HealthSmart (0.0.0.0): Normal (Waiting)</P><P> Interface RVEEH-Network (0.0.0.0): Normal</P><P></P><P>Stateful Failover Logical Update Statistics</P><P> Link : failover Ethernet7 (up)</P><P> Stateful Obj xmit xerr rcv rerr</P><P> General 4514681071 0 515801583 17442707</P><P> sys cmd 7558147 0 7558121 1</P><P> up time 0 0 0 0</P><P> RPC services 0 0 0 0</P><P> TCP conn 3166567303 0 441149517 11257278</P><P> UDP conn 1290642575 0 58911176 6185292</P><P> ARP tbl 49805761 0 8179969 136</P><P> Xlate_Timeout 0 0 0 0</P><P> VPN IKE upd 11222 0 1164 0</P><P> VPN IPSEC upd 96063 0 1636 0</P><P> VPN CTCP upd 0 0 0 0</P><P> VPN SDI upd 0 0 0 0</P><P> VPN DHCP upd 0 0 0 0</P><P></P><P> Logical Update Queue Information</P><P> Cur Max Total</P><P> Recv Q: 0 25 538002965</P><P> Xmit Q: 0 9 4640587425</P><P>svhm-pix#</P><P></P></BODY></HTML> Tue, 24 Feb 2009 04:25:17 GMT https://community.cisco.com/t5/network-security/pix-525-write-standby-issue/m-p/1167583#M875962 sivakumar.ks 2009-02-24T04:25:17Z