topic Re: Error: no flash card! Hanging in Network Security https://community.cisco.com/t5/network-security/error-no-flash-card-hanging/m-p/1192609#M876566 <HTML><HEAD></HEAD><BODY><P>Usually it works correctly. </P><P></P><P>But I need to reset the password. </P><P></P><P>I will change all settings to factory. </P><P></P><P>If you have any other way to reset them to factory also works. </P><P></P><P>Thank you.</P></BODY></HTML> Thu, 12 Feb 2009 00:20:26 GMT andrespt1 2009-02-12T00:20:26Z Error: no flash card! Hanging https://community.cisco.com/t5/network-security/error-no-flash-card-hanging/m-p/1192607#M876562 <P>Hello, I was trying to reset a password on a PIX 520, with Floppy drive and installed the image with the "rawrite.exe" using the file "nppix.bin" which comes in the manual for this version of Bios. </P><P></P><P>I've tried other versions of files "bin" to reset the password but still can not remove it. </P><P></P><P>And when I run the application from the Floppy I mark an error that says: "Error: no flash card! Hanging." </P><P></P><P>This is my configuration. </P><P>I hope you can help me, giving me a solution. Thank you!</P><P></P><P>Please tell me what can i do.</P><P></P><P></P><P>Cisco Secure PIX Firewall BIOS (3.6)</P><P>with a Bios. Cisco Secure PIX Firewall BIOS (3.6)</P><P></P><P>Hardware: SE440BX2, 128 MB RAM, CPU Pentium II 350 MHz</P><P>Flash i28F640J5 @ 0x300, 16MB</P><P>BIOS Flash AT29C257 @ 0xfffd8000, 32KB</P><P></P><P> </P><P></P> Mon, 11 Mar 2019 14:49:08 GMT https://community.cisco.com/t5/network-security/error-no-flash-card-hanging/m-p/1192607#M876562 andrespt1 2019-03-11T14:49:08Z Re: Error: no flash card! Hanging https://community.cisco.com/t5/network-security/error-no-flash-card-hanging/m-p/1192608#M876563 <HTML><HEAD></HEAD><BODY><P>If you boot it up normally does it work fine except for the password or does it hang?</P><P></P></BODY></HTML> Wed, 11 Feb 2009 23:56:15 GMT https://community.cisco.com/t5/network-security/error-no-flash-card-hanging/m-p/1192608#M876563 cdusio 2009-02-11T23:56:15Z Re: Error: no flash card! Hanging https://community.cisco.com/t5/network-security/error-no-flash-card-hanging/m-p/1192609#M876566 <HTML><HEAD></HEAD><BODY><P>Usually it works correctly. </P><P></P><P>But I need to reset the password. </P><P></P><P>I will change all settings to factory. </P><P></P><P>If you have any other way to reset them to factory also works. </P><P></P><P>Thank you.</P></BODY></HTML> Thu, 12 Feb 2009 00:20:26 GMT https://community.cisco.com/t5/network-security/error-no-flash-card-hanging/m-p/1192609#M876566 andrespt1 2009-02-12T00:20:26Z