topic Re: Strange CLI issue in Network Security

Strange CLI issue

qbakies11 — Mon, 11 Mar 2019 14:45:55 GMT

When I do a 'show run' command it scrolls all the way through the whole thing without page breaks. I have quite a long config so this is an issue because I can't see what is at the beginning of the config. It happens if I telnet or SSH and with different programs. Anyone know how to correct this?

*EDIT*

It's not just 'sh run'. It happens with anything I display with the show command.

Re: Strange CLI issue

Tshi M — Wed, 04 Feb 2009 17:30:04 GMT

you might have term length set to zero in your configuration. Try to set term length to a specific number such as

term len 30

regards,

Re: Strange CLI issue

qbakies11 — Wed, 04 Feb 2009 17:31:42 GMT

I don't see a way to set term length, only term width.

Re: Strange CLI issue

Tshi M — Wed, 04 Feb 2009 17:38:57 GMT

Sorry I assumed you were using a switch/router firewall. Please try pager 30 from the config mode:

ASA5510-FW1(config)# pager 30

regards

Re: Strange CLI issue

qbakies11 — Wed, 04 Feb 2009 17:41:54 GMT

Sorry, I probably should have clarified I was using an ASA 5510. Your solution worked, thank you.

Re: Strange CLI issue

Tshi M — Wed, 04 Feb 2009 20:23:40 GMT

I am glad I was able to help out and thanks much for rating the post. We all learn from this forum and it is great when folks rate helpful posting.

Regards,